Jump to content
SAU Community

Recommended Posts

My car is only 3 weeks old and it got hit by a car while i was driving... such an idiot, as he was driving under influence. My entire rear and both left and right rear panel are babdly damaged, need to find a good smash repair that is able to get the parts and bodykits fast and able to do a good job. Any recommendations ?

cheers

Link to comment
https://www.sau.com.au/forums/topic/134234-good-smash-repairs-for-r34/
Share on other sites

yeah, he's got insurance. even if he doesn't my insurance company will make him personally liable as he is under influence. I spoke to my insurance earlier, they said it might be a write off, but i still need to send it for an assess by smash repairs shop. Anyone knows if there are any good smash repairs shops that are good in doing skylines or imported cars.

Yeah not good luck, try not to worry to much if you play your cards right it should work out OK.

Similar thing happened to me in May. I was in an R34 GTT Sedan, fresh import I'd had for 3 months, very clean and straight. I was stationary in traffic and was rear ended by a van (with a bull bar) at full speed.

She hit me so hard her roof buckled, my rear window imploded on impact (even the dash was coved in glass), and the whole rear end was a complete mess, included both quarter panels (plus I had 2 amps custom mounted in the boot) . The only advantage of the bull bar was the main impact was higher than being hit by a car, so chassis damage was minimal.

I don't think you neccesarly need an import specialist panel beater, just one whose bloody dam good. Parts arn't a problem anyone can order them through Nissan Spare parts (delivery takes about 10-12 working days from placing the order). That said your car is still going to be off the road for a bloody long time, but that's not important, a quality job is.

I took mine to my usual panel beater whose a Prestige Mercedes specialist. They pushed for the car to be written off, but the insurance insisted on repairing it.

The repair required half the car to be sprayed so payed for the other half and got a total respray. They replaced everything from the rear window back (except machanics and suspension), including the quarter panels. Cost 10K in parts alone. Got it back 3 weeks ago, they've done an exellent job of the repairs and the paint looks smick. Since having it back I've put it up on a hoist and you can't tell it's been repaired at all, apart from being spottlessly clean, give it 6 months and you just won't be able to pick it. I havn't taken the car for a real hard thrash yet, but I've taken it for a couple of good drives and had it up to about 140, and it feels fine.

I had been planning on selling mine when I got it back, but now I'm definately going to keep it (provided the tyres wear evenly).

Let me know if you want the panel beaters details, their in Brookvale (Northern Beaches)

I can reccomend Sydney Central Panel beaters. Regent st, redfern. 9319 6044 speak to Tony and tell him that Richard reccomended you there. They have done a complete re-spray of my R32 GTR and the job was excellent. They have done work on 2 of my other cars too, and I'm about to take the GTST there for a few minor things. Good honest guys, and lots of pride in their work.

used sydney central panel

sorry richard but i have to disagree...i'm not saying the job is rubbish.....but lacked the pride

more than happy for you to have a look at my car for results.

used golbert restoration at arncliff

decent results....panels lined up well. expensive.

I have not heard of them, why do you ask?

If it's because you know them or they've been recommended by a mate then that's fine. But if your insurance have recommended or are pushing you to take it to them, DO NOT have a bar of it, take it to the repairer of YOUR choice.

post-27251-1158388963.jpg

can you guys post some pics of your cars? Before repair and after? Always keen to see pics!

Unfortunately no pictures of the damage (but it was seriously fcuked), attached are pictures of the repair job.

Pretty much everything behind the back doors (except mechanics & suspension) was replaced, including the rear chassis rail. Total respray.

post-27251-1158389042.jpg

post-27251-1158389134.jpg

post-27251-1158389236.jpg

post-27251-1158389281.jpg

post-27251-1158389420.jpg

post-27251-1158389454.jpg

post-27251-1158389480.jpg

post-27251-1158389547.jpg

post-27251-1158389569.jpg

post-27251-1158389600.jpg

Yeah, very happy with it, had it up on the hoist and the quality is the same underneath. Huge relief, I didn't really know what to expect after that sort of damage.

Got the plates about a week before the accident, forgot about them after that, more worried about the damage!

Called up the repairers that were recommended, but it seems that my insurance company wants my own repairer to go to their assessment centre to do the quote. As its quite far from most of the repairers and my insurance company is not willing to pay for the towing fee, I was not able to get a quote from my own choice. I guess its all left with the repairers they recommended, which is MVR and PR Smash repairs. I'm with just car insurance btw.

Thanks heaps for all that sent me the repairers details.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...