Jump to content
SAU Community

Recommended Posts

Need some help to decide what to get.

What material is better for intercooler pipe work?

Aluminium or ss.

Keeping in mind that ss is heavier, may look better (to some). Resistant to heat better than ali.

ali; lighter, more expensive, temperature sensitive.

Keeping in mind that keeping cool air into the engine is important, and at the same time weight play an important part in as well

Link to comment
https://www.sau.com.au/forums/topic/134582-intercool-piping/
Share on other sites

i really doubt it makes that much of a difference

theres heaps of 300hp cars using these china kits without a problem these days, even most workshops would sell these as most people aim "bang for buck"

and i dont think anyones really tested intercooler vs intercooler to really find out the diffence

save the money and spend on othe areas

i generally like to go with the name brand stuff.. but with the amount of intercoolers available at the moment, the china kits arent all that bad.

id say for moderate power (up to 350rwhp) use a china, but if you are more serious and want big figures, start looking at the greddy/trust, etc kits.

(ive got a china kit on my car, running 300rwhp, i just changed the hose clamps that came with it to the T bolt type and ive had no problems with it!)

don't you know the fact is many branded stuff are made in china and the factories use their technology to make their own ..samething... but i don't think it's a good way to develop themselvs

that is ture...

the greddy m-spec I/C cores are the same as the china/hybird cores BUT the is a big difference (well i think anways) in the piping and endtanks

how can you go wrong with a jap kit for only $600-$700 ?

should be good then, only mods im going to do a fmic, pfc, full turbo exhaust, safc, 11 psi, and probably not much more than that in terms of adding hp :happy:

$600 or so from CRC for a Greddy M-spec cooler its worth the extra $$$.... as i have found with most custom/chinacopy piping kit will fit or touch the bonnet and come close to if not hit the fan...

i have yet to see this problem with the greddy piping

ps there is nothing wrong the china cooler itself as im running one with over 300hp its the piping and endtanks i dont like

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...