Jump to content
SAU Community

Recommended Posts

Hi All,

Just wondering what u guys think of the quote and if there are any places around that could possilby do a better price. Also wondering what kind of improvements are noticed with a decent exhaust. Thanks

A split dump pipe is $600 fitted

A 5" ballistic cat with 3" pipe size is $500 fitted

A 3" system is $580 fitted + tip.

Link to comment
https://www.sau.com.au/forums/topic/135043-exhaust-for-r33-96-sii/
Share on other sites

sounds a bit much to me. sure it may be worth it for the stuff they are using (possibly) but there are systems out there much cheaper. full x-force turbo back 3" in stainless stell for $970 from UAS. that doesn't include fitting, but you could do it yourself. would take about half an hour.

Hey mate,

Try x-force 3 inch turbo back exhuast. U can get for 800 (mild steel) or so. Good performance at good price. check it out at www.Justjap.com

Just search x-force n you'll see comments from other sau memebers who have purchased this product.

Edited by shorty_01
i run the mild steel 3.5" cat back system, with 3" x-force cat, ebay dump, and some front pipe that was already on the car. very happy with it.

hey sorry to go off topic here but im getting the same setup installed tomorrow, is the 3.5" loud? kinda worried about that they had no 3" avialable hehe.

as for the main topic, the prices sound really steep. shop around and like others have said eBay is your friend! good stuff off there. Just Jap do 3.5" mild steel turbo back exhaust minus the canon for $599. then just get a twin pipe muffler off ebay for $100 and ur set.

Not sure about the dump pipe, but the rest sounds like the going rate for a custom exhaust. Good choice with the 3" pipe any bigger you start to get lag, even a 4" inch cat will do the job might be cheaper than the 5".

Check out C.E.S exhaust just type it in google, they have the best dump pipes for skylines.

If you are running a stock exhaust, you will hear and feel the difference you will like it.

Edited by subzeroR33

how does adding a bigger exhaust create lag?

i don't find the exhaust too loud. the rear muffler is only 3", but i have a mate with the full x-force turbo back (3" front, dump and cat, then 3.5" cat back) and it isn't really any louder. it sounds sweet at full noise. burbles a little on deceleration though.

how does adding a bigger exhaust create lag?

i don't find the exhaust too loud. the rear muffler is only 3", but i have a mate with the full x-force turbo back (3" front, dump and cat, then 3.5" cat back) and it isn't really any louder. it sounds sweet at full noise. burbles a little on deceleration though.

Im not an expert but i think it has to do with back pressure so i was told, from experience with my car i had a 3.5" exhaust with a 5" tip hks cannon, the car makes 330 rwkw and it did have lag. The turbo didnt cut in til 4000rpm.

Changed it to a 3" pipe and smaller cannon, it feels more responsive quieter and the turbo cuts in at 3500rpm.

how does adding a bigger exhaust create lag?

i don't find the exhaust too loud. the rear muffler is only 3", but i have a mate with the full x-force turbo back (3" front, dump and cat, then 3.5" cat back) and it isn't really any louder. it sounds sweet at full noise. burbles a little on deceleration though.

madd why does your exaust change size 3 times from turbo to tip i would have thaught keeping things the one size all the way through would be best

Not sure about the dump pipe, but the rest sounds like the going rate for a custom exhaust. Good choice with the 3" pipe any bigger you start to get lag, even a 4" inch cat will do the job might be cheaper than the 5".

Check out C.E.S exhaust just type it in google, they have the best dump pipes for skylines.

If you are running a stock exhaust, you will hear and feel the difference you will like it.

Im not an expert but i think it has to do with back pressure so i was told, from experience with my car i had a 3.5" exhaust with a 5" tip hks cannon, the car makes 330 rwkw and it did have lag. The turbo didnt cut in til 4000rpm.

Changed it to a 3" pipe and smaller cannon, it feels more responsive quieter and the turbo cuts in at 3500rpm.

it may creat a little dead spot running a bigger exhaust but it till make more power everywere even tho you can feel a little delay stomping it with the stock turbo from low revs.. a smaller exhaust may creat back pressure and spool up quicker how ever it will be making far less power.. for instance a mates r32 was seeing 14psi by 2400rpm only made 126rwkw!!! with the stock turbo and a FULL 3inch turbo back exhaust (cat converter had fused together)

after we replaced the cat with a brand newy the car felt completely different to drive in every way.. havent put it back on the dyno yet but am looking at doin that sometime next week..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...