Jump to content
SAU Community

Recommended Posts

I just bought a NVCS RB25DE and im going to bolt on all my RB20DET stuff...

my question to all the knowledgable gents out there in skyline land is:

What size are the stock side feed injectors and will my shit run lean if i use a RB20det computer with stock injectors?

also any helpful hints and tips you guys might have RE installing said motor.

CHEERS, ANDYLAUREL

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/
Share on other sites

People in forums often take issue with NA+T. You'll find I'll arc up each time and say how wonderful it is!

I wouldn't run stock ECU mind you, especially with the massive change in displacement.

I would also use a turbo more suited to an RB25.

Besides that, no reason why you can't hammer out a good 12-14psi on a good tune. You'll see some good power from that and good response with the high comp.

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2513433
Share on other sites

its been done. stock 25det computer and turbo. use the det injectors. the oil suply for the turbo needs to be taken of the oil pressue switch via a t peice.

the oil return is ok. just fit the turbo drain in the block (theres a bung.

the wiring is abit diferant. to what extent i dont know. but its defenatly diferant

ohh ok. the injectors are gonna be way to small.

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2513981
Share on other sites

I've got a set of RB25DET injectors if you want them.

Oh, and a RB25DET Factory ECU

Maybe install those injectors and ECU, and you're good to go..

let me know.

oh, and you'll definately need a new fuelpump.

Edited by The Mafia
Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2514985
Share on other sites

i had a performance shop offer to install one of these into my car for $2100 (including swapping everything over and remapping my stock ecu) which i thought sounded pretty decent, but i was only expecting 6 or 7 psi because the compression is pretty high already. Without replacing anything bottom end to decrease compression, what sort of power would you be looking at with your setup? You can pm me if you like, i dun wana get your thread off topic.

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2515169
Share on other sites

What size are the stock side feed injectors and will my shit run lean if i use a RB20det computer with stock injectors?

Again, I am saying NO to the RB20DET computer with stock injectors on that block. How on earth are its maps going to be correct on a 2.5L engine.

You need what The Mafia is offering if you don't want an after market ECU.

Edited by psybic
Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2516482
Share on other sites

wtf? You can't hook up a RB20 ECU to a RB25 motor...

my god..

Easiest fix - Install RB25 ECU, and injectors. Car would probably start fist go. And won't need to be re mapped...

anyway, don't say I didn't warn you.

Also, wouldn't the RB20 wiring loom be different to the RB25 loom?

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2518735
Share on other sites

or just remap the stock RB20det ecu to cope with the extra demands :(

I'd do the same thing too...an rb25det ecu would probably allow you to run the car but i think the ignition timing maps might be too aggressive for the de+t...

Edited by limpus
Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2518831
Share on other sites

i was thinking that the stock RB20 ecu will be perfect to run the RB25DE because i will be using an RB20 AFM and the RB25de injectors are the same size as 20DET injectors...

hence when the engine is running, the AFM is metering a larger amount of air going into the engine (becasue its 2.5ltrs) and will add fuel accordingly... hence mixtures will be fine (at idle)

before you knock my block off, i understand that anywhere on boost, the 260ccs will not be able to supply sufficient fuel, but i think my metering hypothesis is correct...

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2521943
Share on other sites

I've tried to use an rb20 ecu on my rb25. I was looking to do a remap. The rb20 ecu had the rb25 maps loaded onto it.

IT just wouldn't run. It idled like shit even with the rb25 maps. I remember reading somewhere before in the pfc threads that the ecus have slightly different wiring and require some modification.

Link to comment
https://www.sau.com.au/forums/topic/135068-rb25de-t/#findComment-2521962
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...