Jump to content
SAU Community

Recommended Posts

At 3pm i'm going to have a look at a '93 1.8i 5sp soft-top MX5 that my gf wants to buy. I'll be leaving a deposit on it if it all looks good, and possibly pick it up tonight.

Has anyone got any tips on problems or common faults with these models?

Anything in particular to look for ?

This one has 148k on the clock, nice 17" mags, and i've offered 9k over the phone (hopefully bring it down a touch more).

Edited by Munkyb0y

I used to have a 93 but it was a 1.6... i thought that the 1.8 didn't come out til a few years later

things to look for are basically the same as on any car, just pay attention to the roof (old plastic windows tend to tear or be almost non-see thru) anchors. sometimes they are wrecked and you are basically up for a replacement roof...

Other than that they are a great car (a little underpowered) awsome on the twisty bits...

Have a really small boot though....

Good luck

Jdfnq, the 1.8i came out in Nov '93. Will check soft top/anchors thoroughly. It's a girl's car, doesnt need power :rofl:

Thanks for the tip. Do you think 148k is a bit high for those little blender motors?

ctjet, as if i'm gonna drive it, paleeeeeez.

any more tips?

Jdfnq, the 1.8i came out in Nov '93. Will check soft top/anchors thoroughly. It's a girl's car, doesnt need power :rofl:

Thanks for the tip. Do you think 148k is a bit high for those little blender motors?

ctjet, as if i'm gonna drive it, paleeeeeez.

any more tips?

nah the motors are pretty bullet proof.... the 1.6 is anyway, the 1.8 is a heavier motor and therefore the handling is not quite as good as the 1.6...

oh and the 1.6 is quicker (don't ask me why or how, just is)

but if your not driving it i wouldn't stress

148k,s is pretty good.... most of thenm at that age have over 200 on em

yeah i heard that about the 1.6, they reckon it was a better model.

still i'm finding it hard to even find an mx5 for under 10k, besides a few ragged '90 models.

i've been told this one is in perfect condition (yet to be seen), serviced regularly etc.

so for 9k, i think it's a bargain if all checks out ok.

The 1st series is supposed to be the most fun to drive. I have driven the 98 model and that has more power and is a smoother engine. Id probably check the top to see any tears and what not. Check the bolts to see nothing has been removed before (they leave marks if they ahve been removed). Do the usual oil check, water etc. Test for black smoke - rev it to around 3500 or 4 - and keep it there, then hit the gas and let go real quick - that will show if any black smoke is coming out.

Lastly, mechanical inspection - since this is not a turbo normal mechanical inspection should be ok i think....

Test for black smoke - rev it to around 3500 or 4 - and keep it there, then hit the gas and let go real quick - that will show if any black smoke is coming out.

3500 - 4000rpm ???

that seems pretty high to be revving in neutral. are u sure emsta?

Awesome handling on these. My dream is to get a cheap one imported for race and whack a soarer V8 in the front end. ctjet wouldn't ever catch me :rofl:

Ignore everyone else and just enjoy a brief nip out for fun.

But the roofs are the only problem i know of.

How sweet is the new folding lid MX-5???

Oh yeah, agree with Emsta. I'm doing the head on one right now for a mate off a 1.8 MX-5. You can safely go to redline in neutral. Also look for blue smoke on backoff.

My dream is to get a cheap one imported for race and whack a soarer V8 in the front end. ctjet wouldn't ever catch me :)

;)

:rofl:

weight distribution 70/30 might be a problem in the MX with the mighty V8 tho... and munkeh if you see blue or black smoke come out of any car you should walk away

I think I can save you a lot of hassle. A friend of mine has one that he imported and has been used as a second car to his two skylines. It's in awesome condition with nice rims, good paint work and he replaced the soft top since he's had it. from memory it comes with a hard top too which is pretty cool. The best part is he is a mechanic and a very good one. He owns Grey Imports in annandale. The car has not been advertised yet, but i know he is keen to sell as he offered it to me. I would definately give him a ring. 9519 5150. I would have bought it to use as a second car (well 3rd car) but my GF cannot drive manual. price is very reasonable too.

I think I can save you a lot of hassle. A friend of mine has one that he imported and has been used as a second car to his two skylines. It's in awesome condition with nice rims, good paint work and he replaced the soft top since he's had it. from memory it comes with a hard top too which is pretty cool. The best part is he is a mechanic and a very good one. He owns Grey Imports in annandale. The car has not been advertised yet, but i know he is keen to sell as he offered it to me. I would definately give him a ring. 9519 5150. I would have bought it to use as a second car (well 3rd car) but my GF cannot drive manual. price is very reasonable too.

LOL Richard, you are so quick. I just finished sending a pm letting him know about this car also.

Cheers

Jo

I think I can save you a lot of hassle. A friend of mine has one that he imported and has been used as a second car to his two skylines. It's in awesome condition with nice rims, good paint work and he replaced the soft top since he's had it. from memory it comes with a hard top too which is pretty cool. The best part is he is a mechanic and a very good one. He owns Grey Imports in annandale. The car has not been advertised yet, but i know he is keen to sell as he offered it to me. I would definately give him a ring. 9519 5150. I would have bought it to use as a second car (well 3rd car) but my GF cannot drive manual. price is very reasonable too.

what year? how much? i'm about to go see this one now, but will keep in mind. thanks

EDIT: nevermind, have details in PM. cheers.

Edited by Munkyb0y
3500 - 4000rpm ???

that seems pretty high to be revving in neutral. are u sure emsta?

I did that with all the r33's to test for black smoke - they all were fine :). And I also have done that with my 82 civic - which sadly I must say gives out a lot of black smoke :rofl:

edit - yeah if there is any blue or black smoke - say that there is another car you want to check out as well and that you will let the guy know - then just run like hell....

Edited by emsta2003
LOL Richard, you are so quick. I just finished sending a pm letting him know about this car also.

Cheers

Jo

lol, you have to be quick to beat me Jo! :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...