Jump to content
SAU Community

Hot Spark Plugs?


Rissole
 Share

Recommended Posts

Theres lots of posts about spark plugs on here but ive got a question.. :D

R33 gtst usual mods standard turbo..

Re-moved "iridium nismo 8" spark plugs from car (god knows what these are? 0.8 gap?)

Put in NGK Iridium BKR5EIX-11, gapped to 0.8 (i know you're not supposed to gap iridiums).

I wanted to put in BKR6EIX, but id allready bought the BKR5EIX.

Running with the BKR5EIX 's the engine wasnt even coming onto boost it was just pinging and spluttering everywhere.. with low down torque not really there either..

I put the Old iridium nismo 8 plugs back in and all is now good and back to normal..

So im guessing the Iridium BKR5EIX (5 heat rating) is too hotter a plug?

I know i should have the 6 heat range, BKR6EIX, for the kind of mods i have, but would the 5 really do this kind of thing to the performance of my 33?

Any feedback would be great.

Looks like ive just wasted $100 on the damn wrong heat range sprakies.. :( , Dumbass.

Link to comment
Share on other sites

Theres lots of posts about spark plugs on here but ive got a question.. :nuke:

R33 gtst usual mods standard turbo..

Re-moved "iridium nismo 8" spark plugs from car (god knows what these are? 0.8 gap?)

Put in NGK Iridium BKR5EIX-11, gapped to 0.8 (i know you're not supposed to gap iridiums).

I wanted to put in BKR6EIX, but id allready bought the BKR5EIX.

Running with the BKR5EIX 's the engine wasnt even coming onto boost it was just pinging and spluttering everywhere.. with low down torque not really there either..

I put the Old iridium nismo 8 plugs back in and all is now good and back to normal..

So im guessing the Iridium BKR5EIX (5 heat rating) is too hotter a plug?

I know i should have the 6 heat range, BKR6EIX, for the kind of mods i have, but would the 5 really do this kind of thing to the performance of my 33?

Any feedback would be great.

Looks like ive just wasted $100 on the damn wrong heat range sprakies.. :) , Dumbass.

Yah think you have got yourself some hot plugs, put it ip in ebay and sell at half the cost. At least you can recover something back.

Link to comment
Share on other sites

you can't go past the plugs with the code BCPR6ES. they are only copper and are about $3 each (better than about $20 each for iridiums). i've had mine in for about 10,000kms at between 12 and 14psi and they haven't missed a beat. it had iridiums in there and they were dead after 20,000ks. i'm going to change them again at the next oil change (at $24 a set, why not)

but a guy i know put platinum plugs in (heat range 5) and it pings like a bitch, and pops and farts. he took me for a spin in it last night, but he wouldn't listen when i told him his plugs where wrong (1 of those know-it-all types).

Link to comment
Share on other sites

you can't go past the plugs with the code BCPR6ES. they are only copper and are about $3 each (better than about $20 each for iridiums). i've had mine in for about 10,000kms at between 12 and 14psi and they haven't missed a beat. it had iridiums in there and they were dead after 20,000ks. i'm going to change them again at the next oil change (at $24 a set, why not)

but a guy i know put platinum plugs in (heat range 5) and it pings like a bitch, and pops and farts. he took me for a spin in it last night, but he wouldn't listen when i told him his plugs where wrong (1 of those know-it-all types).

Sometime cheap is not necessary bad and expensive is not necessary good. The key is to choose the correct form, fit and function that cater to your engine. The BCP6ES are without the V groove, choose the BKR6E-11 (gap down when necessary) which cost around there too.

Link to comment
Share on other sites

It all depends on the mods you have.

a mildly modded car shouldn't have major issues running a 5 as they are the stock replacement plug.

A 6 heat range plug is a good move with more boost up to about 1.1bar/16psi. bcpr6es/bkr6es is .8 copper out of the box, bcpr6e or bk.. is the v groove option.

A 7 over that up to low 20psi

I'd start with a 6 bcpr6es as they are cheap enough. If no good then make a few enquiries about the nismo plugs and try a copper 7.

Link to comment
Share on other sites

cheers fellas..

Yeh ill try the bcpr6es hopefully the 6 heat range is better. didnt realise a 5 heat range would be so S!@T

I might even keep the old nismo 8 iridiums in there and just clean them gently..

Ive got the old typical coilpack hairline cracks too, might fix them up as ill probably need too one day anyway..

thanks for the confirmation about the plugs.

Lata.

Link to comment
Share on other sites

hey i am more or less going through the same thing i have been using 7es in my 33 and have had no real problems went to enquire about iridiums and could get them for about $18.oo each and the same for platiniums but could not get them in 7,s ended back with old faithful bcp7es for grand total of $21.00 ,cheers

Link to comment
Share on other sites

  • 2 weeks later...
Don't know if this has been said but you can't compare all plugs by their number e.g. 5 or 6 as some plug manufacturers hotter and colder plugs ranges move in opposite directions.

yeh cheers, i know, i was just talking about ngk's.

ill be going the $21 option too.. ;)

Link to comment
Share on other sites

mine was missing on boost...heat shrinked my coils and gapped my plugs at 0.8 that fixed it...then turned the boost up to around 12psi and it started missing again so i went for the bcpr7es gapped at 0.8 and everytihing is now sweet! id definatly recomend going for the 7...+ it costs like 24 bux!

Link to comment
Share on other sites

i'm using the bcpr6es and i'm running 14psi with stock coils. they pop and fart on the very odd occasion, but they are about 7000km old. i'm going to go to the 7 heat range on the new plugs, just to get the heat down.

Link to comment
Share on other sites

i'm using the bcpr6es and i'm running 14psi with stock coils. they pop and fart on the very odd occasion, but they are about 7000km old. i'm going to go to the 7 heat range on the new plugs, just to get the heat down.

Remember to check your colder plug for fouling...

NGK FAQ

Link to comment
Share on other sites

You can't go wrong with the BCPR6ES plugs. I had a set of splitfire plugs in mine which cost around the $20 a plug mark. They lasted all of 3 weeks before they started missing. Then the car sat for 2 weeks in the spray shop and i went to pick it up and it wouldn't start!

A trip down to Autobarn and 6 x BCPR6ES later and they haven't missed a beat. This was in October last year as well so they're probably due for a change! :P

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Squealing is aids. Street cars, weekend track cars are not allowed to squeal.
    • The front speakers in an R32 are 6x4s which is a shit size. You can fit 6.5" woofers or coaxials in there but you need to make a mounting board from MDF. I have a post on here somewhere showing what I made. You can fit 6.5" in the parcel shelf easily enough. If upgrading the head unit, the stock speaker wiring is not really fat enough to run big speakers (ie the wires into the doors or up to the rear) because the amplifiers are located next to the speakers. Running new speaker wires front and rear is a good idea anyway.
    • Been ages since I did anything on the s15 but got some time and motivation over the weekend. Brakes are now fitted with fresh seals, hardware and pads. Bolted up with the alpha omega brackets, just waiting on 2 fittings and sensors to Bleed them. With that done moved onto the fuel system. The injectors have been cleaned ,flow tested, new filters and orings.  Made a bracket to hold the surge tank with surge tank and pumps mounted then plumbed. Roll-over valve done too. Need to make a new loom and add individual relays for it all. Had new flange welded on inlet manifold for a bosch 74mm DBW throttle body.  Coolant bypass hose done with some fittings welded on now then soda blasted. Waiting on sensors to arrive to install and pwr for radiator and intercooler still. Getting to point of buying an ECU and looking like may be going something else as link doesn't have enough inputs.   Work has been awesome with first trip to Perth and now on the way to Darwin looking for a good result there.
    • It always makes me laugh when I hear things like this, when I was a young bloke I bought a old Mk1 Escort, one of my mates said "how do you expect to have a girlfriend in a old car like this", my reply was "if she doesn't like the car she can walk, and if she is more interested in the car I drive than me she can fark off" This is how you can tell if you have a good woman, they care not about things like the cars you drive or what it sounds like Pandering to crazy obsessed women who care more about how they look in a car than the person driving it is something that I've always kept away from Not saying my Mrs isn't crazy at times, but it's typically me being a idiot that incites the crazy 🤪
    • But where's the fun in that, for me it isn't about the money, I have money, and I have time, I enjoy the process of things, the picking parts, the "adventure" of it all, and for the bits I can do myself, the actual work is enjoyable, well, varying levels on enjoyment on hard to reach things like that farking thermostat I just changed
×
×
  • Create New...