Jump to content
SAU Community

Recommended Posts

As topic states, I am putting my car up for sale but first just wondering what you guys think would be a fair price to ask... I know alot of the money you spend on mods don't really count for much when you go to sell it but here it all is anyway (i would have posted in the sale section but it's not for sale yet!)

96 GTS-T 90,000ks

Full veilside kit

17" rims

T3/4 turbo producing 300+rwhp @1bar

Apexi AVC-R

Apexi Power FC and hand unit

3" exhaust from the turbo back

9 Puck extreme ceramic clutch with 2500 pound pressure plate (in the process of being fixed as its making kinky noises)

HKS intercooler

HKS filter

GFB fart valve

GTR fuel pump

1k alarm (discount insurance)

4k stereo with 2 12" subs with custom install in boot

um prolly missing out some other bits.... apart from the dogey clutch and a couple of very small chips on the front bar its running sweet as

any ideas? cheers miles

Link to comment
https://www.sau.com.au/forums/topic/13613-rice-has-to-go-what-it-worth/
Share on other sites

yeah dood seriously the series II aspect will net you a few more dollars anyways, cos of the air bags and definate ABS well mostly. Especially to people starting to get into skylines. for others who have purchased cheaper skylines a series II doesnt represent too much extra value, but you will find more people will like the more updated look.

the mods will definately get more dollars, i reckon honestly you could remove most of the mods and still sell the car for $26

especially if it all neat/clean and immaculate basically.

The mods will net you more money on their own

Just look at car yards, and you got decent km's as well

anyways good luck with the sale when you do sell it mate

get pauls wing, that will get ya an extra thousand

Paul....peace brother you know I am playing, i love it man

little high but smeh its the goods

selling for a few reasons partly on the 10 minute drive to work this morning a saw about 11 skylines.... yeh i know market is tough, but I'm not out to rip anyone off infact i think i will give a really good deal. But your right it might end up going for a lot less with less modz...

you know how it all started?

in the USA they had huge roadside bill boards with GOT MILK? to remind people to grab some on way home. turbo and high tech mag picked up on it after that. i bought one of their shirts in the states bout 5 years ago. my wife bought my plates for my RX3 i had at the time.

I honestly think coming from a sales point of view that you should sell and swap parts... this way would get you money and you could probably sell what left for about 22. ie sell and trade the turbo AVCR fuel pump all the extras for an amount.. you will prob make an extra 2G or so this way....

You already have a buyer if you want to sell some of your stuff... ME! so it is a win win situation! i can trade you stuff plus $$$

up to you though.. otherwise go for about $25 - 26 maybe more!.... your car is still in good nic :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...