Jump to content
SAU Community

Can U Get Defected For Fmic?

bernard R33

By bernard R33,
in South Australia

 Share

Recommended Posts

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

Even when u get to regency its a person by person basis which determines how u go.

This is what people should be complaining about as they are all supposed to be following ADR laws which SHOULD be the same for all australia....which we all know they are not.

pixel8r Mentor

pixel8r

Posted
Posted
Yes, it sucks but basically you can be defected for anything non standard.

Actually from what i've heard you can get defected for anything standard as well - depends on the mood of the cop.

If the car is legal you can head straight to a cop station and they'll remove the defect but it would still be unnecessary hassle.

Mike_ Rising Star

Mike_

Posted
Posted (edited)

I'm of the understanding that if you take an SA car to Victoria and get it defected, then it is only defected in Victoria. Take it to another state, or return to SA, and the defect does not stand. However if you never clear the defect in Vic, and then if you return with the same car (or the next owner does) then you can get busted by the vic police for it. Which is what people said on page 1 :D

If you want to know if anything is defectable just give regency a call. The people there are the ones who can help. I enquired about a pod filter originally and they advised that as long as you don't affect anything to do with emissions, or change the AFM, then it's legal. Also Regency should be able to send you written information. Most mods are legal, but the catch is you need to get an engineers certificate for it to prove it. If you can provide the cop with written information proving your mod is legal, then he more than likely won't defect you for it, BUT if you get booksmart on them they'll often get cocky and find something else to defect you for :\

Bear in mind that getting through regency is different to being defected. Cops can get you for anything non-standard that they suspect to be an issue, and they force you to go to regency to get it checked out. If the cops are wrong, then regency will clear the car - but if they find anything that isn't legal, they won't clear it. AFAIK that's the point of the system.

Edited by Mike_
Turbo Tits Community Regular

Turbo Tits

Posted
Posted (edited)

Hiya. I just took my car through regency with a pod and big front mount still on the car. No problems.... and I had 3 staff members going over the car at the same time, so you should be ok.

Edited by Turbo Tits
DC_GTST Experienced

DC_GTST

Posted
Posted

POD and FMIC are fine in SA. Just don't cut the body/chassis in anyway for the piping and you're fine. Just make sure that POD is bracketed down (the only thing some of them like to pick on). Both brother and myself went through regency with both

Nozila Grand Master

Nozila

Posted
Posted
Hiya. I just took my car through regency with a pod and big front mount still on the car. No problems.... and I had 3 staff members going over the car at the same time, so you should be ok.

good to know all is good. should come on the dyno day if time/schedule permits.

nisskid Grand Master

nisskid

Posted
Posted

um..a cop can defect u for suspicion of a defectable car. so either way, ur f**ked if a coppa doesnt like u, hence be as nice as possible even if ur car is not defectable (not really possible as pretty much every single car on the road has atleast one un-roadworthy item)

Cubes Grand Master

Cubes

Posted
Posted

Remembering back to the days of school when we had a mr policeman come and visit us in yr 9. The idea was to educate us a little about road safety.

I remember he suggested if we get pulled over to jump out of the car with your license ready and try to approach them before they approach you. Obviously don't get out the car and run at them - lmao - as you'll probably end up on the ground or have a gun pointed at your head.

Its worked for me so far (touch wood), its a bit of a laugh when it catches them off guard and they are fumbling quickly to try and grab their bits and pieces as you wait. Not all but some. :happy:

If anything I do it simply for my own amusement. :)

nisskid Grand Master

nisskid

Posted
Posted (edited)

the only time ive been officially pulled over i was doing something very wrong so i was pretty much stone cold in a full car of dickheads coming up with bs excuses. ended up all good, lucky he wasnt a prick otherwise i would have been taking a bit of time off the whole driving thing and have my car in the lockup.

ud hate it if they saw u getting out and thought u were gonna try and make a run for it on foot.

Edited by nisskid
Turbo Tits Community Regular

Turbo Tits

Posted
Posted
good to know all is good. should come on the dyno day if time/schedule permits.

Hey buddy. Yeah, the car went through fine, even got decent fellas too. I hope youre enjoying the diff.

I'm gonna have to give this dyno day a miss, as the car is still in standard form from regency.

Take it easy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...