Jump to content
SAU Community

Radiator Froth, Blown Head Gasket? Where'd That Coolant Come From?!


Recommended Posts

OK.. the other night my car was overheating.. pulled over (in city, in peak hour WOO) and popped the bonnet and car started steaming from.. well looked like it was coming from the engine.

So now I have coolant all pooled around my injectors (just got the seals changed 2 months ago and now they've perished hooray) and having alot of trouble finding where it came from.

There's dried coolant basically between my plenum and engine.. on top of the left rocker cover a bit....

Turn the car on & there was a leak, coming from possibly the water pump?

My theory is that if it came from the water pump perhaps the fan blew it slightly upwards towards the injectors and then steam etc etc. There is a fair bit pooled around the injectors though.

Also now after trying to find the leak I've noticed that the radiator is frothing quite alot, looks like frothed milk.

Is that a sign of a blown head gasket or possibly to do with the leak (maybe from somewhere else)?

Would a blown head gasket spray coolant everywhere?

I don't know, what do you guys think.

We were intending to do the 100k service this weekend anyway but the head gasket wasn't on the menu.

Don't really want to pull the car apart though and then not be able to find the leak.

Hope this all makes sense!

Cheers

Kaz

Sounds to me like you have had a water leak that spewed the water, the car overheated and blew the head gasket, or it could be the other way around with the extra heat and pressure you have blown a pipe after the head gasket went either way, its head off and fix it.

Sounds to me like you have had a water leak that spewed the water, the car overheated and blew the head gasket, or it could be the other way around with the extra heat and pressure you have blown a pipe after the head gasket went either way, its head off and fix it.

yeah I agree and unfortunately that means you need to at a minimum get the head checked for straightness, if it is warped there is no point just putting a new head gasket in and hoping for the best .

good luck

take it to a radiator Man or get him to come to you and get him to pressurize it whlie its cold with his little pump ... you will find the leak straight away without risking more damage ... Depending on how hot you got the head will depend on whether the head will need work or the gasket seperated ....

head gaskets rarley spray water outward .its more inward to the exhaust or oil galleries

head gaskets can do a variety of things when blown, at the moment this sounds like the most likely explanation

there will also be an underlying cause for the overheating you'll also need to fix

e.g. failed water pump => overheating => blown head gasket

it's also possible to warp or crack the head if it overheated seriously enough, this should be checked for (you generally have to send the head off to get reco'd when changing a head gasket because of overheating)

anyway, you can get a compression test or leakdown test done to find out exactly where it's leaking from, this would be the next step in diagnosing the problem.

thanks guys for the replies, though I was hoping for better news! ;) Although I hadn't responded til now, I have been reading them.

Everything's off now except for the head itself.. so much for doing anything else this weekend!! We did most of it on Saturday in only a few hours though, so that was alright. Let it never be said that girls don't work on their cars, yet again my nails are all broken.

Did a cold compression test yesterday before dismantling it, was pretty even.

hey Al busy this week/next weekend? ;) Might need a bit more man muscle over here to help with the head, I can barely pull off the hoses :O

hm, find a head reco place and get them to do a quote on a head reco

I think head reco is usually around $300-500 or so depending on what they have to do (but you'll have to check and get a quote). I've paid $300 in the past but for a 4cyl 8 valve head.

$100-150 for the gasket kit (usually includes the stem seals etc.)

you should replace the water pump definantly.

and probably the timing belt while you're there...

Check all the welsh plugs and coolant lines once you have the head and manifolds off (just incase that was where it was leaking coolant from)

once you've done all that it should be sweet, you can also get the head ported and polished but depends on how much you want to spend.

Edited by MerlinTheHapyPig

yeh I had literally just left Nissan 10mins earlier when the car started overheating :~( So anyway I already have a water pump, belt, bearings etc because I was about to do a 100k service on it.

I also have to get the injectors done for the 2nd time this year due to the heat, bah.

Anyway we were thinking since half the engine bay is empty it might be a good time to recondition the engine.. but I'm not sure yet... guess it depends on price at this point... even doing it at home doesn't look like it will be much cheaper but fairly time consuming... anyway I think someone's just looking for an excuse to buy more tools!!

Guess I'll see if the head's warped and go from there. 2nd hand CA heads are pretty cheap I'm told.

Should just get rid of the bloody thing and drive the gazelle again!

Thanks again :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...