Jump to content
SAU Community

Recommended Posts

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

Edited by R3sp3ct
Link to comment
https://www.sau.com.au/forums/topic/137244-wtb-wheels-for-the-track/
Share on other sites

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

I HAVE SOME.. :happy:

17 x 9 front and 17 x 10 rear with tyres... will sell them to you for $350 plus deliv, im in tassie, these would be great for track, they are the perfect offset for teh r33 as they are on mine... no spacers needed... have a look

let me know

the pic of my car is availbel if you follow the link

http://www.skylinesaustralia.com/forums/in...howtopic=134504

Hi hi,

Im still after wheels as the other ones fell through.

Prefere anything around 255, i want width!

yeah sorry about that, im getting them repaired though, but like you said "you could find something for that price and not need to worry about the price."

My rims were 17x9 and 17x10 and have yokohama rubber on them and i was selling them to him for $400 delivered....

if anyone has somethign similiar for a similiar price then help this bloke out...

Beef

Hi,

I have a very track worthy set of rims and tyres

I know these fit GTST's perfectly as a few of them are using these rims on our trackdays :D

Also im selling them with semi slicks so you're ready to get out there and have some fun

Link is below for you

Oh, maybe i didnt say it correctly, its rims and semi slicks for that price

The tyres are worth around $300 each, and have easily 85% left on them

So the rims are actually VERY cheap there

But if thats not your thing, no worries

I have some s15 stock wheel with bridgestone re540's on them. Two of the tyres are almost dead but would be fine if you run lots of camber (scrubbed on outside) but the other two are about 70% tread. After $450 which is what they cost me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...