Jump to content
SAU Community

Recommended Posts

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

Edited by R3sp3ct
Link to comment
https://www.sau.com.au/forums/topic/137244-wtb-wheels-for-the-track/
Share on other sites

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

I HAVE SOME.. :happy:

17 x 9 front and 17 x 10 rear with tyres... will sell them to you for $350 plus deliv, im in tassie, these would be great for track, they are the perfect offset for teh r33 as they are on mine... no spacers needed... have a look

let me know

the pic of my car is availbel if you follow the link

http://www.skylinesaustralia.com/forums/in...howtopic=134504

Hi hi,

Im still after wheels as the other ones fell through.

Prefere anything around 255, i want width!

yeah sorry about that, im getting them repaired though, but like you said "you could find something for that price and not need to worry about the price."

My rims were 17x9 and 17x10 and have yokohama rubber on them and i was selling them to him for $400 delivered....

if anyone has somethign similiar for a similiar price then help this bloke out...

Beef

Hi,

I have a very track worthy set of rims and tyres

I know these fit GTST's perfectly as a few of them are using these rims on our trackdays :D

Also im selling them with semi slicks so you're ready to get out there and have some fun

Link is below for you

Oh, maybe i didnt say it correctly, its rims and semi slicks for that price

The tyres are worth around $300 each, and have easily 85% left on them

So the rims are actually VERY cheap there

But if thats not your thing, no worries

I have some s15 stock wheel with bridgestone re540's on them. Two of the tyres are almost dead but would be fine if you run lots of camber (scrubbed on outside) but the other two are about 70% tread. After $450 which is what they cost me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...