Jump to content
SAU Community

Recommended Posts

Can anyone help? Hicas light comes on when i spend any more than 2-3 minutes over 110/120kmh

I will be putting a cancelling bar on soon but i am interested to know if this is a major or minor problem,

and if there is an easy fix in the meantime.Light goes out when car is shut down & restarted.Is it ok to pull

the fuse or does this cause more dramas? :(

Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/
Share on other sites

Do you have 2 different tyre sizes compared to the front and rear?

I'm guessing your speedo is working correctly.

You can do a diagnostic run to check for problems, have a search for the appropriate thread.

Cheers

Josh

Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/#findComment-2557163
Share on other sites

It is almost certainly because your steering wheel is not on straight, and after HICAS thinks you have been going in circles for 3min it throws up an error code.

Do you have an aftermarket steering wheel?

Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/#findComment-2558441
Share on other sites

It is almost certainly because your steering wheel is not on straight, and after HICAS thinks you have been going in circles for 3min it throws up an error code.

Do you have an aftermarket steering wheel?

Yeh,I have a non-gen wheel fitted,but its on straight...Is there a steering angle sensor or something fitted to original wheel?

Thanks for the 411 on the diagnostics for hicas, problem is boss kit.Nissans are all new to me,SAU is a great resource!!

Edited by fazzy
Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/#findComment-2558982
Share on other sites

I am having exsactly the same problem. I think its cauz the previous owner bought a cheap steering wheel and got a boss kit and got some one who dosnt know what there doin to install.

Is there any problems with this?? is it going to affect driving or steering in any way?

Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/#findComment-2571663
Share on other sites

quick fix

go to your hicas computer (under your parcel shelf) and unplug the smaller of the 2 wiring harnesses in the back of it. then find the green wire with white trace line and cut it. plug your wiring harness back in

its easier to get to from the back seat when its out compared to from the boot.

this wire sends the signal to the warning light when something hicas related has gone wrong. the light will still come on if the resevoir is low on fluid

Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/#findComment-2580828
Share on other sites

Can anyone help? Hicas light comes on when i spend any more than 2-3 minutes over 110/120kmh

I will be putting a cancelling bar on soon but i am interested to know if this is a major or minor problem,

and if there is an easy fix in the meantime.Light goes out when car is shut down & restarted.Is it ok to pull

the fuse or does this cause more dramas? :)

Has anything at all been done to your hicas? I have the same problem with mine but i locked the hicas up my own way.

Link to comment
https://www.sau.com.au/forums/topic/137354-hicas-issues/#findComment-2581470
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...