Jump to content
SAU Community

Recommended Posts

It depends. If you choose not to put a cat, then yes it is going to be loud. I got a 3-3/4 inch pipe all the way through with with a big tip, and it doesn't sound loud at all. It makes deep, bassy sounds, naturally, more than standard system. But not that loud. The thing is, I put two cats in there. One at the original spot and another one somewhere near the fuel tank.

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-271726
Share on other sites

Guest INASNT
Originally posted by Shiro

It depends.  If you choose not to put a cat, then yes it is going to be loud.  I got a 3-3/4 inch pipe all the way through with with a big tip, and it doesn't sound loud at all.  It makes deep, bassy sounds, naturally, more than standard system.  But not that loud.  The thing is, I put two cats in there.  One at the original spot and another one somewhere near the fuel tank.

y did u put a big exhaust on and then put on 2 cats?

the cats are the most restrictive parts of the exhaust!

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-273793
Share on other sites

Originally posted by Shiro

It depends.  If you choose not to put a cat, then yes it is going to be loud.  I got a 3-3/4 inch pipe all the way through with with a big tip, and it doesn't sound loud at all.  It makes deep, bassy sounds, naturally, more than standard system.  But not that loud.  The thing is, I put two cats in there.  One at the original spot and another one somewhere near the fuel tank.

if you were concerned about noise then why didnt you just put 2 resonators in? two cats... WTF?

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-274620
Share on other sites

yes. yes you get flames. Big flames. about 3 feet long, a nice orange blue... stainless dump, trust front, trust 'racing cat' :), 4" trust to straight through system... standard ECU. Between gears 1-2 and 2-3 at night the whole surrounding area lights up like a lightening strike... of course i now have a cat

PS loud... try 102dB on for size at 3000rpm, imagine at redline!

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-274717
Share on other sites

Bigger exhaust does not allways produce more power. As with most things, once you exceed a certain size, it is pointless going bigger. A freind took off his 3" exhaust from the turbo/dump pipe, at the drags last year, and he lost 0.1 of a second

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-275937
Share on other sites

Guest INASNT
Originally posted by aybee

most cars out there are running undersized exhausts. ive been told that a car running around 300 rwkw should have a 5 inch exhaust. theres a few cars running that power but i doubt there running that exhaust size.

pffft 5inch exhaust!

who da *** told u that crap

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-279575
Share on other sites

Originally posted by aybee

most cars out there are running undersized exhausts. ive been told that a car running around 300 rwkw should have a 5 inch exhaust. theres a few cars running that power but i doubt there running that exhaust size.

If there are alot of cars running that type of power, with only a 3" or 3.5" exhaust, it obviously not required to have a 5". So many w/shops can't be wrong, the person who told you that either has no idea about turbo cars or is talking 5h1t. What it an exhaust place, trying to drum up some extra cash?

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-279679
Share on other sites

Originally posted by Shiro

A lot of things could cause that kind of miss at the strip.  It could be a bad launch or something.  I do not think exhaust system would only affect 0.1 sec, Dude!

I have to agree with you 100%. What i should have also wrote was that the only difference the owner felt was the extra "lag/sluggishness" off boost. I guess the only way to tell is by getting the car on a dyno and doing a few runs with ex. and a few without.

Link to comment
https://www.sau.com.au/forums/topic/13748-how-loud/#findComment-279695
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...