Jump to content
SAU Community

Recommended Posts

I found a unichip unit piggybacked to my factory ecu (R33). I had no idea it was there, and i assume the previous owner didnt know.

I was looking at putting an safc in when i found it, so it's a bonus having the ability to alter timing, and possibly boost, as well as afr's.

Where do i get this tuned in Sydney?

What does a tune (probably fine tune) cost for these?

Anyone using one? Any advise or tips?

cheers

Link to comment
https://www.sau.com.au/forums/topic/138373-who-tunes-unichip-in-sydney/
Share on other sites

thanks Abo Bob (still cant believe you're neither of those things :teehee: ).

i will contact them. do you recommend these guys from experience?

also, i was told these units arent too bad, and definately a step up from safc.

has anyone had any experience with a unichip?

thanks Abo Bob (still cant believe you're neither of those things :teehee: ).

i will contact them. do you recommend these guys from experience?

also, i was told these units arent too bad, and definately a step up from safc.

has anyone had any experience with a unichip?

I think def a step up from SAFC but some people don't like them. Hard to get a good tune done. I think it may be because they can't be tuned in real time.

Lot's of people recommend them but when I rang them looking for a tuner they said something funny that put me off. It was only one thing but it made me not trust them.

TM Autosports on the Central Coast do them to and they seem alright.

Lot's of people recommend them but when I rang them looking for a tuner they said something funny that put me off. It was only one thing but it made me not trust them.

are you referring to unigroup?

you're not gonna tell us what they said, are you?

central coast is too far. i just got back from penrith (hitman) in this stinking heat, that was far enough. lol. unfortunately he doesnt do unichip.

Hi mate,

Give Peter a call at 'Advan performance' at silverwater - 96471326 he just tuned my car on the weekend and I am very happy with it, he is very helpfull and easy to speak with these guys tune alot of skylines. You can even ask him what is the next mod you should do and he knows how to tune your car without pushing it too hard.He knows alot about skylines good luck.

Hi mate,

Give Peter a call at 'Advan performance' at silverwater - 96471326 he just tuned my car on the weekend and I am very happy with it, he is very helpfull and easy to speak with these guys tune alot of skylines. You can even ask him what is the next mod you should do and he knows how to tuned your car without pushing it too hard.He knows alot about skylines good luck.

did he tune a unichip for you?

any idea of price?

The reason why some people dont like Unichip is because tuning them is not acessible by everyone.

i.e the workshop has to be a certified Unichip dealer meaning they will have the software/hardware to do it. Otherwise it cant be touched, a la Fcon.

http://www.airpowersystems.com.au/unichip/applications.html

Hard to get a good tune done. I think it may be because they can't be tuned in real time.

Mine can, but being a newer car it could be a recent addition to the unit. It was one of APS' biggest selling points when they ran a tech day at AutoTech.

So yeah, the Unichip tuners I'm aware of in Sydney:

CRD

Unigroup

Auto-tech

All come pretty highly recommended by various people.

Do NOT !!! go to C&V for unichip tuning.I speak from experience.Go directly to Croydon.Frankly, if I had any brains I should have stayed with that level of tuning and not gone down the long path of horsepower hunting.My car was so good on fuel and crisp to drive but you know how it goes,"I want more".

Had my car booked at C&V at 9.00am,they started working on it at 2.00pm.Twenty minutes to install and 15min of tuning and sends me on my way.Crap,crap,crap.The same car with the speed cut removed.

Burn me once and I never return.So booked it with Jim and two and a half hours later I was very happy.215rwkw. All the safety of a standard computer but a tune the factory should have done.

I`m currently changing everything again so I havn`t learned anything.PFC is far superior but it took me a while to find a great tuner,not Jim though.Sorry Jim.But if low 200`s are all your after then yes, the unichip is great.

Do NOT !!! go to C&V for unichip tuning.I speak from experience.Go directly to Croydon.Frankly, if I had any brains I should have stayed with that level of tuning and not gone down the long path of horsepower hunting.My car was so good on fuel and crisp to drive but you know how it goes,"I want more".

Had my car booked at C&V at 9.00am,they started working on it at 2.00pm.Twenty minutes to install and 15min of tuning and sends me on my way.Crap,crap,crap.The same car with the speed cut removed.

Burn me once and I never return.So booked it with Jim and two and a half hours later I was very happy.215rwkw. All the safety of a standard computer but a tune the factory should have done.

I`m currently changing everything again so I havn`t learned anything.PFC is far superior but it took me a while to find a great tuner,not Jim though.Sorry Jim.But if low 200`s are all your after then yes, the unichip is great.

so what did the tune cost you with Jim?

around $450 from memory but that was two years ago.My unichip was the old version with no ability for boost control.You will need a good fuel pump so if you havn`t got one then contact Paul McGrath, performance-wise, he has Tomei bolt in fuel pumps at reasonable prices.Don`t go for the walbro or even the Bosch pumps as you have to remove the anti flow-back device to fit it.This will make it difficult to start.Make sure you have a fuel regulator as well. :O

ok, either i'm a tightass and unaware of the cost of tuning an existing unichip, or that's alot.

my unichip is also an older type, been in the car at least two years. boost control is not confirmed yet.

there's also another small box connected, non descript, has no name, label, or markings, but has a harness that looks like its running to the ecu.

anyway, looks like i better start shopping around.

might consider an fmic before the tune. this recent heat has had an impact on the usually smooth and responsive feel of the car.

(edit: car has stalled on starting 3 times in the last 3 days (previously always started perfectly) and the idle was playing up a bit while driving. is this related to the current hot weather?)

besides 3 inch turbo back exhaust and pod, the car is stock (running 9psi which isnt a stretch since it was running that on stock boost).

why do u say i'll need a fuel pump?

Edited by Munkyb0y
  • 5 months later...

SUPER BUMP

Just wanted to update this thread.

If anyone else was looking at getting a Unichip tuned in Sydney, try C&V Performance at Caringbah. http://www.cvperformance.com.au/

They did a great job on mine, at a fraction of the costs mentioned above.

These guys definately know their shit. They can tune anything for you. ANYTHING. I'm impressed with their work.

Went in with 170.2rwkw@10psi, left with 182.2rwkw@10psi (3" exhaust + pod + r34smic. everything else is standard).

There wasnt even that much room to move, coz the unichip had already been tuned obviously by the previous owner, or whoever.

So he played with the afr's a bit, and also scrapped the existing timing, and started from scratch.

We did about 12 odd runs, till he was happy.

He discovered i had a boost controller module on the unichip, so we replaced my mbc with the standard solenoid, and he set that up too. But we were still running 10psi, from first to last run, so the gains arent from extra boost.

I actually forgot that you had recommended against them. Only just read that bit again now.

I ran into them by accident when getting my mate's 6litre SS chipped. I spoke to the tuner, Con, and apparently he has a shit load of experience with unichips.

They were one of the largest unichip agents, back in the day.

Anyway, i'm happy with it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...