Jump to content
SAU Community

Recommended Posts

My mate with a R34 GT-T noticed some severe misfiring after giving his car some stick on a hot day. We pulled the sparkies and I almost had a heart attack... and this is how 5 of the 6 looked. :rant:

sparkiejs4.th.jpg

Changed em and the car runs fine now. Its a miracle the porcelain/metallic bits didnt seem to damage the ceramic turbine or valves. Then again I haven't done a compression test since. Is this guy lucky or what!! :( No I didn't create this thread to bag out my mate, just to show you guys what kind of damage detonation can do and how easy it is to loose a motor.

Link to comment
https://www.sau.com.au/forums/topic/138463-detonation-damage/
Share on other sites

Hes probably gonna have some nice chips out of the crowns of those pistons, probably off the exhaust side. When the heat gets too high the coatings can come off any of the fancy plugs, especially if you regap them yourself. coppers for the win.

did u turn the motor over once with each plug out to blow crap that might be left in there out of each bore? A piece of spark plug could cause pre ignition if its inside the camber...

When i pulled apart my old motor it had small bits of crap floating inside, ontop of each piston...

IMO if this was caused by detonation, it would be very unlikely to have done 5 sparkplugs, as i would have thought detonation would be more prone in one perticular cylinder, then the next. By the time you have 5 cylinders detonating, something would break. Is it possible the fuel pump is on its way out, causing lean mixtures hence far higher combustion temps causing spark plug melting and detonation. Just my 2c, correct me if im wrong

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...