Jump to content
SAU Community

Recommended Posts

post-32230-1160823598.jpgG'day guys, i recently bought an r34 gtt and would like to put the boost up. the only mods i have are exhaust, intercooler, and now a boost controller. as far as i know its ok to have 14psi on stock? do you think thats ok or will i fry things like the turbo? what is a good boost to run on the neo 6??
Link to comment
https://www.sau.com.au/forums/topic/138693-upping-the-boost-on-r34-gtt/
Share on other sites

most people say 10-12psi. it really depends on when the ecu hits rich and retard. you will know when you hit this as it kills the motors power. it retards the timing and richens the fuel right up.

i run 14psi on my 33 with a remapped ecu. goes a lot better than 12psi, and when my turbo blows i have an excuse to get a new one.

so i could run the standard boost on low and maybe 11psi on high you think and that should keep me happy and stop me from spending more money. after buying the car i dont have much of that left! she's only done 35000 k's!

I found 34 gtt's hit r&r a lot easier and harder than r33's. I dynod one stock, and then after a turbo back and front mount, nothing else, and r&r was savage, lost up to 30 kw, only gained about 5kw after it clawed its way out of the hole.

well maybe you coulod get a fuel cut defender, or if in your budget just get a pfc now save your hassles later on, just a thought if not try 9-10psi if it retards then just back the boost down, it will still feel better than standard.

Have a look in the trader section search a user by the name of performance-wise he does group buys on powerfc's with the handcontroll for under 1000 delivered i just bought a unit through him very good to deal with.

They are a complete engine management computer which replaces the standard ecu allowing the car to be very efficiently tuned getting the most out of the engine and its modifications.

Edited by fEkuaR
Have a look in the trader section search a user by the name of performance-wise he does group buys on powerfc's with the handcontroll for under 1000 delivered i just bought a unit through him very good to deal with.

They are a complete engine management computer which replaces the standard ecu allowing the car to be very efficiently tuned getting the most out of the engine and its modifications.

thanx man, just checked it out, should i still be buying my electronic boost control or does the power fc cover that as well?

thanx man, just checked it out, should i still be buying my electronic boost control or does the power fc cover that as well?

You can use a apexi boost control kit that goes with the powerfc. Or you can just run a seperate boost controll unit. The boost controll kit with the powerfc is a little extra but if you havnt bought a controller yet id go with that and get it at the same time you can buy it with the group buy aswell.

most people say 10-12psi. it really depends on when the ecu hits rich and retard. you will know when you hit this as it kills the motors power. it retards the timing and richens the fuel right up.

i run 14psi on my 33 with a remapped ecu. goes a lot better than 12psi, and when my turbo blows i have an excuse to get a new one.

When your turbo blows the smaller ceramic particles that can result can find thier way back into the engine. This is why blowing the stock turbo isn't a good 'plan' even if it's the excuse you want to buy a new bigger one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...