Jump to content
SAU Community

Recommended Posts

Yes the original file was created from scratch in vector format, it was NOT converted from a raster format like jpeg or bitmap. Once the file was created, it was saved in various formats - EPS and AI (vector) and JPG, BMP and PDF. These file formats have all been provided, and PPQ were able to (eventually) give us a reasonably good pic for the plates, with only the colour needing adjusting. How they managed to stuff up a straight red is beyond me, but I thought that was the only problem with it?

Quick note: EPS refers to a file format, not to whether the image is stored in a vector (infinitely-resizable) or bitmap (dots).

Yes the original file was created from scratch in vector format, it was NOT converted from a raster format like jpeg or bitmap. Once the file was created, it was saved in various formats - EPS and AI (vector) and JPG, BMP and PDF. These file formats have all been provided, and PPQ were able to (eventually) give us a reasonably good pic for the plates, with only the colour needing adjusting. How they managed to stuff up a straight red is beyond me, but I thought that was the only problem with it?

Quick note: EPS refers to a file format, not to whether the image is stored in a vector (infinitely-resizable) or bitmap (dots).

Sighing... now look, I can tell you a PDF file created out of Illustrator contains exactly the postscript data as an Illustrator EPS. The word 'vector' is only an industry term used when referring to infinite quality and not file formats in any regard.

The term PDF stands for 'portable document format' and was created for compressing files and for use in cross platform applications, meaning it can be used in both Mac and PC enviroments whereas the EPS file format isn't native to PC.

The only way the color can shift or differ when creating a pdf from the eps is when color profiles are excluded or the entire Adobe package be it v8,9,10, CS or C2II color settings are not cross calibrated.

Either way just because a file may or may not contain correct color information it doesn't mean the color cannot be corrected at the printers end...it bloody can and this guy is yanking your crank!

The final word..find another printer if you can because this PPQ guy will run himself out of business because he has NFI!!

The final word..find another printer if you can because this PPQ guy will run himself out of business because he has NFI!!

LOL...can't really do that considering we are discussing graphics for number plates and PPQ (Personalised Plates Qld) are the body that actually make the number plates...bit hard for them to run themselves out of business :)

I am well aware of what a PDF/EPS file is, and that postscript, being a standardised PDL, is going to be consistent regardless of what kind of file it's embedded (or encapsulated, hence EPS) in. I'm also aware that in image terms, vector refers to an image storage method that uses point data (vectors) to store an image, rather than what coloured dot goes in what place. My point was that we sent a large number of formats, not how these formats compare to eachother. Some places demand files in specific formats, hence why we have the files saved in several already.

I do understand what you're saying wrt colour matching too, the image was not created with a colour profile attached, but it was sent to them with a note of what we wanted and Mud got a proof back which looked the goods. It was approved and the plate did not match the proofs. Proof <> product = their fault, unfortunately they have a monopoly and we can't go anywhere else :) Given that they haven't been very helpful so far it might be a while before we get what we've asked/paid for... :D

They are all a bunch of slack-jawed faggots if you ask me!! How hard is it when we supply the art in every format we had, including the hi-res stuff, and they still manage to FUBAR the whole process. Mud and I are the only ones affected so far, but it is hurting club members who have wanted to proceed with the purchase only to be told to wait and see if we can fix the problem first.

Again thanks everyone for you input.

If you wanna rag on PPQ then dont bother your posts will be deleted

If you wanna argue about file formats and so on dont bother your posts will be deleted

Get crackin !!

times a wastin!

Karen

I do not have any files sent by Marc that were in EPS format.

Mark,

yes you do

I sent a GTR style logo to your urban weddings email address...don't tell me I didn't do something for you when I know it was done. You even acknowledged that Marc arranged for the logo for you HERE

Attached below is a screen shot of the original as supplied to you (screen shot taken in Adobe Illustrator).

post-24887-1161205894.jpg

Nevermind about the colours...PPQ can chop and change these to suit themselves, which they did...

Don't forget you used a logo for the first sample and it had a shadow, which I might add you even said looked like crap...so this logo as above was created, with no shadow.

My apologies to Marc and Karen (Revhead & SMR33).

They have both been most helpful in the production of many many files for these plates, just seems I cant get one to work with PPQ.

My previous post was typed quickly and upon re-reading looked quite nasty. Gone now.

Sorry again guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...