Jump to content
SAU Community

Recommended Posts

Ok, so I was thinking of upgrading my stock exhaust to a 3" turboback. I was looking into getting one of those xforce mild steel ones.

I've still got the stock ecu and i'm trying to stay away from upgrading it.

My car is a R33 S1.

Mods are:

K&N Hi Flow Panel Filter

Boosted to 10 psi

Sports muffler (yes thats right, the muffler only.....hence the upgrade.)

Current economy: 500kms from 50-56L

Will it make my car run rich and have bad fuel economy?

Thanks guys...

it shouldn't affect it too much. although it will be letting more air through the motor at 10psi so it may use a bit more.

also you shouldn't be running 10spi through the stock exhaust. it isn't good for the turbo. you are adding more heat into the system as it is working harder to get to 10psi.

i've been told 2 opposing stories on this.

1. any mod incl. exhaust (which is highly recommended for better flow) will cause the ecu to run things a bit richer/use more fuel.

2. the bigger exhaust will allow the motor to run less restricted, using less effort, better economy. this one i heard for the first time the other day from a tuner. i have my doubts.

having a bigger exhaust should give you better economy at cruise, because it has more power (due to less restriction). so you should be able to use less throttle % for a given speed.

at WOT it lets a bit more air into the motor, so the ecu has to add in more fuel to keep the afr's right.

so both of munky's answers are right.

wooohooo, cant lose.

but if you're getting 500kms to a tank now, you're doing pretty well. so lets say you start seeing 480 or even 450 a tank, that's nothing to complain about.

get the exhaust, it's a very worthwhile mod. from the turbo back is the way to go.

my economy is crappy too. ~15L/100kms.

but then i just found a unichip connected to my ecu. didnt know it was there.

maybe a tune may help. but the car runs farken great, and sometimes you mess with stuff and then regret it.

sorry for cross-threading again. goober lookie here http://www.skylinesaustralia.com/forums/in...t&p=2595890

Edited by Munkyb0y

Just about 85% of my kms are around town.

I had the impression also that with a bigger exhaust it would actually make the engine run more efficiently, but as said before at WOT it would run richer than stock.

Hmm thanks guys, I just wanted to make sure that I wouldn't be seeing it drop to 300 - 400 kms per 50-55L.

And yes, driving style has a lot to do with fuel economy. When I bought my car it was dead stock, the first I week I had it, I did 300kms to 55L :D

Edited by KeyMakeR33

i think it depends largely on the way u drive it, if u mainly cruse then ur car should have the same or even better fuel economy with the turbo back because as it will require less throtle to keep the car moving but if u give it a bit then it will have better flow in which case it will require more fuel to match the afr. but a turbo back exhaust is the very first mod u should do. u should never boost ur car higher with a stock exhaust and/or stock intake as you are working the turbo harder and creating extra heat.

the R33s run quite rich standard, i found fitting a full exhaust and pod only confuses the sh*t stock ecu even more and runs the car even richer. SAFC or Power FC or some other type of fuel/air management would be ideal if your worried about fuel economy and richness.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...