Jump to content
SAU Community

Recommended Posts

Hi Guys... Just posting something that's concering me a little bit..

I had a Run wif a (97 Model GSR Not Sure if it's Vtec or Not..) @ Drag Strip Sometime Ago

Spunned it when i dropped it on 2nd then Redlined it a little bit then dumped into into 3rd n Squeeled a little bit..

My Mods r Stock Turbo Boosted to 10Psi, Cat Back 3", Hybrid GT FMIC, Extreme 9 Puck Clutch, HKS Filter on Cusco Zero1's Coilovers & 17"z wif 245'z @ da back..(R33 GTS-T Series 2)

Was Suprised He Kept up wif me.. didn't kill him like i thought i would.. just didn't think he would of kept up wif me that close..

My Question is what do u Guys reckon that Integra had Mod wise.. n what Mods do i need to leave it for dead.. hehe.. :laugh:

P.S. (Gettin a 3" Dump Pipe/Front Pipe in one and 3" Hi Flow Cat S/S X-Froce installed on Monday)

Thanks

-SeSaR

Edited by Black_CSR
Link to comment
https://www.sau.com.au/forums/topic/139455-integras/
Share on other sites

i dont think "add more powah" was the response he was looking for

seriously, some drivers are for one reason or another, better and the drags... integras arnt fast and you'll comforably blow 99.8% of them off the road without raisng a sweat

Notice I was asking key suspension and tyre question before telling him to get a power fc?? ;)

Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2599911
Share on other sites

You sure it was a stock Integra GSi? Why would anyone bother to take a stock GSi to the drags?

Must have had an Integra Type R engine transplant.

My mate has done this engine transplant with Type R gearbox with adjustable cam gears, exhaust, R compound tyres. It is seriously quick. He was getting consistent low 13secs passes with it.

Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2599976
Share on other sites

If it was a GS-R then yes, the 1.8 litre engine has VTEC...but its like only 125kw at the engine.

Back then though I thought there was only GSi / VTi-R models in Aust, but I'm not certain ;)

Do you have your time card? Scan it in for us so we can see your 60 foot etc times

Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2600025
Share on other sites

I raced a Honda Integra Type R, he beat me, purely because he was more use to his car.

Sure they are quick, but with a good launch, the right changes etc... You should beat him with your current set up.

I've got a pretty stock car, cat back exhaust, safc II (I don't think it's tuned), phat tyres (17" 235 fronts, 255 rears), Heavy duty clutch and a HKS pod filter with CAI box. Rest is stock as a rock. But I know if I was doing my gears better (I'm new to the car at the track), I could have beatin him easily as he was only just getting up on me during gear changes (he was flat changing, while I wasn't and I launch like bog or wheelspin).

Just practice your driving and you should be fine. The dump pipes will help you out heaps... but more important is how well you can drive. ;) Go take some courses and lessons, best way to learn :D

Edit: I should point out my 120kg friend was in the passenger seat and myself at 90kg. It all makes a difference, I still drive soft... Coming from a Twincam Corolla to a Skyline is fun :D

Edited by LightAssassin
Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2600102
Share on other sites

NO i don't have my Time Card anymore this was a while ago..

I was runnin Nexen N3000 Tyres on 32Psi all around.., the Zero 1 Coilovers didn't have damper/stiffness Adjustment.. just the Height.. but the Front End was Lowered than the Back End..

Before i take it to the DragStrip again will prolly Get a Short Shifter n Maybe CAI...

How do u guys Launch ur Car?? Do u guys let ur Clutch ride out a bit.. or just Dump it.. Mind kinda Bites hard.. so i let it ride out a bit.. or if i just Dump it.. it will Bog Down sometimes

Thanks

-SeSaR

Edited by Black_CSR
Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2601510
Share on other sites

I've seen naturally aspirated Integras over here with street-legal tires run 12s with K20s and 13s with B18s. Coulda been rocked by a sleeper.

There is tons of stuff power wise you can do with an Integra that you would never know the difference from stock. An Eaton or centrifugal supercharger has no visible outward signs of tuning. 300+ hp and under 1000 kg is pretty quick.

Some of the fastest street class Integras state side look bone stock except for slicks and a gigantic intercooler. The top guys make 600-800 hp and run into the 8s and 9s. The tires are definitely the main giveaway with a quick front wheel drive car

Edited by Inline6TT
Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2602727
Share on other sites

I had a Run wif a (97 Model GSR Not Sure if it's Vtec or Not..) @ Drag Strip Sometime Ago

Was Suprised He Kept up wif me.. didn't kill him like i thought i would.. just didn't think he would of kept up wif me that close..

tell us what time did u run

Link to comment
https://www.sau.com.au/forums/topic/139455-integras/#findComment-2603340
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...