Jump to content
SAU Community

Recommended Posts

this has been covered a few times, general consensus is that it doesnt effect performance positively or negatively, i personally would suggest using a matte black as opposed to a gloss as i would assume gloss would be thicker, just go back and forth doing light coatings with a spray can and that should do the trick, im doing it this way myselkf as soon as i get the time.

Guys i wanna paint my front mount black (mainly for cosmetic reasons) anyone else done this? what is the best paint to do? or am i better off taking it to a panel beater and getting them to hit it with the black?

Steve

you need blingy chrome behind that red bar steve :D

Guys i wanna paint my front mount black (mainly for cosmetic reasons) anyone else done this? what is the best paint to do? or am i better off taking it to a panel beater and getting them to hit it with the black?

Steve

hurry up and find out!

alpinestars want to know already

i want mine pink

Are you doing the whole cooler black or stencil?

If you want a good job get some decent paint (dont get supacrap). And prep is very important. Are you going to prime it?

The only downside I can see is that it'll attract the heat.

Instead of matt (bunky) or gloss we've got satin black in the shop and it's top quality paint imported from germany. It's artist paint and it's formulated to help noobs get less drips :)

Are you doing the whole cooler black or stencil?

If you want a good job get some decent paint (dont get supacrap). And prep is very important. Are you going to prime it?

The only downside I can see is that it'll attract the heat.

Instead of matt (bunky) or gloss we've got satin black in the shop and it's top quality paint imported from germany. It's artist paint and it's formulated to help noobs get less drips :)

you would think that painting it black would attract the heat but it doesnt :)

there is some engerinning behide it but i forget it hehee

Are you doing the whole cooler black or stencil?

If you want a good job get some decent paint (dont get supacrap). And prep is very important. Are you going to prime it?

The only downside I can see is that it'll attract the heat.

Instead of matt (bunky) or gloss we've got satin black in the shop and it's top quality paint imported from germany. It's artist paint and it's formulated to help noobs get less drips :)

Matt black will stik to anything with great results as it has lesser of a paint base, just make sure it free of any grease or wax coatings. get yourself some wax and grease remover/prep wash. There is no need to prime it as you want the paint thin as possible so it does not act as a insulator.

Any can of matt black paint will work, no need expensive imported paint that "helps you get less drips" .

Nice even coats will be the key.

Yr 10 physics lets us know that black will work best. But as i said, its purely cosmetic! Thanks guys or the feed back guys. Ill smash up some photos once all is done. Might even try to get it out on a cruise sometime soon :)

wanna paint mine at the same time?

i do audio u do paint?

deal f**ker :)

No primer - no base protection...so the paint will be more prone to getting imperfections (rocks/chips/scratches).

Hey hey hey, who ever said the german paint is more expensive...and more expensive than what? (It's cheaper than dulux, less high pressure than dulux and you get interchangable spray nozzles to adjust the type of spray and flow) and i wouldnt go anywhere near export paint, fades like there's no tomorrow)

I just can't get into matt black on cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...