Jump to content
SAU Community

Recommended Posts

Hey Hey,

Just curious to know how many ppl have actually had a crash whilst at a track day? (major/minor)

Im in the process of getting my gear together for a track event myself, and have been wondering if accidents are common hence expensive :)

From looking around the forums i havent really seen anything, so im guessing its quite rare?

....Bonus points for any pics too! :)

Edited by R33_STEALTH
Link to comment
https://www.sau.com.au/forums/topic/139834-anybody-here-had-a-crash/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

In Vic I could name....

Roy (R32 GTST)

Adzmax (R34 GTT)

Emre (R33 GTR)

RowdyR32 (R32 GTR)

RMPGTR (R33 GTR)

Scotsman (R3 GTR)

Black Viper (R33 GTST)

Al (R33 GTST)

clayoth (R34 GTR)

And they are just the skylines I can think of.

Others from here include

BBGTR (STI)

wokka wokka (WRX)

pomme joe (EVO VIII)

So it happens. I have video of Rowdy's off along with another WRX from that day >_<

PS - if your on this list and want to be removed let me know. :P

i'm certainly no track day veteran, but i have seen more wrx's have more accidents at the track than skylines

the awd factor must give some people a sense of confidence that the car will be good in a spin out situation

quite odd

oh jeeze i didnt think there would be so many...!

What are some of the examples? ...we talking about hitting the kitty litter and damaging front bumper or are we talking the type that requires a tow truck ride home?

i'm certainly no track day veteran, but i have seen more wrx's have more accidents at the track than skylines

the awd factor must give some people a sense of confidence that the car will be good in a spin out situation

quite odd

The only time I have taken a WRX for a proper drive in the hills I noticed that if you backed off hard it did a very nasty squirmy thing. So if you made a mistake going fast and backed off too hard you could easily crash. I think it was all those diffs fighting each other

If you were at the recent SAU Eastern Creek track day; you would've witnessed an explosion :) Car was not even towed home... was just left there like a burnt out chip!

This I think was an isolated incident and does not happen often.

Is there some sort of insurance u can get for ur car? (Although i highly doubt it! :))

Shannons have a race car extension, but when I asked about this they said it wasn't really meant for Skylines (more classics, etc) and I would be looking at a total premium of around $5k (with a max coverage of $20k).

Don't let any of this put you off however. There are heaps of people that haven't had any issues. But the advice is still not to put yourself in a situation where you can't be without the car you take to the track for a period of time. Even if it's 12months + as is often the case if something goes wrong for us club level guys.

It's still the most fun you can have so it's totally worth that risk.

HaHa...nah, it hasnt put me off :banana:

I just like to ask heaps and heaps of questions when im about to take something on just so i'm fully aware.

Although, im a lil worried about forking out 20+K for a GTR for it to end in the wall....

I might have to reconsider the cheaper alternative(S13) as this is purely just for shits and giggles :)

Here you go - the kink at Sandown including RowdyR32

Also - you won't cause a crash to someone else at a sprint day. I've never seen it happen. People cause their own crashes.

I never realised that you could hear me in that video. :P

My experience.

29506153789.jpg

29506153762.jpg

This happened over the top of the back straight at Sandown, when the LHR brake pad delaminated, dropping the backing plate and piston out of the caliper, and leaving me very quickly with minimal braking and turning the wrong way into the corner.

hey, R33_STEALTH

the only track stuff i have done is drifting...

i did come off maybe of a times (ones was pretty close to hitting the wall) but most of the time, it just felt like i did some major damage when really i just did no major damage at all.

like Snowman said, i found @ drifting that the guys with the more track time would come of harder and do major damage. while me and alot of the other people learning just had the minor offs now and then.

i guess you just got to go out there and no push ur car beon ur limits. i must admit drifting isnt full on but when i try to do a few laps of just grip racing it became alot more faster and you really need to stay carm :P

ohh and if you think ur not ready for track days hit up some mc days they are awsome fun (maily 2nd gear work) and you get to learn alot about your car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...