Jump to content
SAU Community

Recommended Posts

Its weird, I'm worried it would leak because there is no o-ring, gasket etc behind the cover to seal it. But it mustnt be leaking as it feels as good as before but is running AFR's in the 10:1 range under full load. Take a bit of fuel out of it and might be on a winner :)

Not having issues with what sounded like surge at 100kmh-110kmh in 5th gear. Bit odd that the anti surge cover seemed to be causing surge there :S

Will keep everyone posted.....

Also: Photo DVD's are sitting in my car so if you want one I can meet you somewhere over the weekend or something

Great day at Palmyra today

Stoked with how my car went with the new front cover, and my quick hour touch up of the tune yesturday

13.028@110mph with a 2.06 60ft time

Last run:

13.889@110mph with a 1.8 60ft time. Missed a gear on this one, would have been in the 12's :(

question, anyone travelled between Rocky and mackay recently?

if so, how are the roads? last time i went up to mackay i went through countless roadworks on the highway, and many hours were spent removing tar from the side of my car. would prefer not to have to go through that again :down:

Start with the basics mate, Front mount intercooler, 3.5inch full exhaust system, electronic boost controller, ECU (Power FC is good for budget) and maybe a clutch upgrade. I would recommend not to go over 11 psi of boost on standard turbo as they will tend to blow and a general rule of thumb is your roughly allowed around 10% power increase on standard tune (e.g exhaust and intercooler upgrade) before you have to start looking at AFR's and re-mapping the computer. Depending on your budget you can can pick up all these parts cheaply second hand. What are your plans for the car? because if you going for over 300kw, i would just go for a RB26 transplant as they are one tuff engine and make more power easily.

I may have a power FC for sale soon......

I did all my supporting mods first (pretty much the stuff ben just said) then all I had to do was bolt on a turbo, get new injectors and a tune and was all ready to go

Some people like doing it all at once

No right or wrong way just depends on budget and time constraints

But as I said I may have a power fc and Z32 AFM for sale in the next 2 months

I can go one better Callan, lol

I've got a Powerfc, hand controller, nismo 555cc injectors already in a fuel rail for sale, right now :)

I'll even throw in a full tune for an extra $100.

Haha. You're welcome to PM me mate if you want any of this. I'd love to sell it as a package.

Just bare in mind a full Powerfc tune in Mackay Mackay is worth about $800+ and there aren't any shops around here that will do as good a job as me. I love these cars and take time and care. Not a rush job to get them charged and out of the workshop.

I got 2 RB30 blocks a turbo one and a non turbo block. Just need some RB26 heads, waiting for a rainy day to build a new engine for the R33 GTR but will be quite a few years before that happens. I got my new toy to play with now can't wait to play with my 350Z VQ35 engine the old RB's are boring the shit out of me at the moment.

When's our next cruise i have a car to drive now!!!!!!!!!!!!!!!!

Start with the basics mate, Front mount intercooler, 3.5inch full exhaust system, electronic boost controller, ECU (Power FC is good for budget) and maybe a clutch upgrade. I would recommend not to go over 11 psi of boost on standard turbo as they will tend to blow and a general rule of thumb is your roughly allowed around 10% power increase on standard tune (e.g exhaust and intercooler upgrade) before you have to start looking at AFR's and re-mapping the computer. Depending on your budget you can can pick up all these parts cheaply second hand. What are your plans for the car? because if you going for over 300kw, i would just go for a RB26 transplant as they are one tuff engine and make more power easily.

Thanks for the help,

At the moment from what I know. I know it has a full 3.5" full exhaust system, It has a ECB and it's running 10PSi on the boost at the moment. It has a front intercooler installed as well. It's also running semi sport slick tyres. (New as well). Budget is tight at the moment after just buying it. Bascially it's already a cop magent which is bad for me (I'll leave it at that eh?) It sounds extremley nice where it is, I'd like to get a little more out of it to begin with without going overboard. The things I've been looking at is a short shifter, new clutch, bigger brakes and a nice new type R Alpine full stereo system (Like my music).

The interior will be the last thing I touch. But just a little more oophm would be nice, not that it doesn't already have it. It's also having a new engine brace/strut being sent up from the previous owner as it's without one currently.

Awesome help so far guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...