Jump to content
SAU Community

Recommended Posts

If mine dies I'll have a hard time deciding wether to switch or not. Buying a new PowerFC is easy. Plug it in, load my tune and away i go. But the added features of the Vipec are worth retuning.

Decision I hope I wont have to make for quite a while

Nah I didnt end up going, will sort out these boost issues and go next time KSOS and work dont line up

Next 1 is on the 20th Cal and im home for it. Pretty sure you are on the same roster to me?

Order the bushes and do it yourself I would not pay anyone to do anything in Mackay bunch of useless rip off merchants, I prefer to buy the tools I need and do it myself hate paying people to do shit.

Order the bushes and do it yourself I would not pay anyone to do anything in Mackay bunch of useless rip off merchants, I prefer to buy the tools I need and do it myself hate paying people to do shit.

I would have to find some sort of DIY guide because i'm in no way confident with something like this, but yeah i know what you mean!

If you don't want to do it yourself or take it to a shop, go and see Leon Minic, he'll do it for you, better than any shop and most likely half the price.

He's got quite a good set up too. He's one of the guys that runs the drift club.

If you don't want to do it yourself or take it to a shop, go and see Leon Minic, he'll do it for you, better than any shop and most likely half the price.

He's got quite a good set up too. He's one of the guys that runs the drift club.

Got any contact details mate and where's he from?

Press = hammer + socket lol

true, im going to have a chat to one of the boys from the workshop at my work and see if they have a press if not i can get a hand to do it DIY or talk to that Leon bloke and hopefully he has a press/can fix it for me cheap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...