Jump to content
SAU Community

Recommended Posts

Shoot me down? Haha!

Coming from someone that provided a car that run like shit, had a f**ked head gasket from having too much timing in it, and was a complete mess?

Haha yeah you keep shooting me down.

So you're blaming me again?

I thought I just f**king sorted that.

f**k me.

The car wasnt f**king touched, by myself OR Nick. So how am I 'someone who provided a car that was running like shit'?

Riddle me that.

now you're trying to double it back on me so I 'fess up' and say I tuned it?

Well guess what, I dont even think the f**king vipec software is installed on my laptop, I didnt have a wideband at the time so how the f**k would I Have tuned it? I DIDNT. Simple.

Ok, so it wasn't you. I actually thought you were the person that tuned it because he did say it was tuned or worked on in townsville..

I don't even know you remember - Just like you don't even know me.

As I said, 1 workshop and a guy who does tuning outside of his normal work tuned the car. WE NEVER, ONCE TOUCHED THE FUEL OR IGNITION MAPS. We havent even plugged the flamin mongrel into my laptop.

Edited by Force Fed

I'm not blaming anyone.

You guys persist in saying how shit I am over something very petty. Nick even says that my tunes are shit because the intercooler pipes kept blowing off. lol!

But the car did come from you and Nick, so who knows. I guess me making these assumptions is no different from the ones you're making - You know all about me yet you're so far away and haven't seen a single thing. lol.

Edited by The Mafia

Yeah, good backing up, once again.

You have zero proof that nick or I even touched the ecu.

You're accusing me of 'supplying a f**ked car' and guess what I AM THE PERSON YOU'RE ACCUSING. I know what I supply, I know what I've touched, I know what I havent f**king touched. And that ECU is something I HAVENT TOUCHED.

You have to keep emphasising the fact that I'm "backing up" or that you're "shooting me down" to win your stupid argument.

lol.

I should start saying that...

I shot you down buddy... say I'm a bad tuner yet the car had so many issues... Tuning, mechanically, bad setup, f**ked turbo, f**ked wiring.. the list goes on.

Glass houses...

Coming from someone that provided a car that run like shit, had a f**ked head gasket from having too much timing in it, and was a complete mess?

Ok, so it wasn't you. I actually thought you were the person that tuned it because he did say it was tuned or worked on in townsville..

I don't even know you remember - Just like you don't even know me.

I'm not blaming anyone.

You guys persist in saying how shit I am over something very petty. Nick even says that my tunes are shit because the intercooler pipes kept blowing off. lol!

But the car did come from you and Nick, so who knows. I guess me making these assumptions is no different from the ones you're making - You know all about me yet you're so far away and haven't seen a single thing. lol.

Not blaming anyone eh?

See bold, then see underlined

do you enjoy contradicting yourself?

Edited by Force Fed

I was merely talking about the tune... *yawn*

But I do not know what happened with that.. Could have been any one of you and you're just covering your asses. I have seen it many times.

I could point out other things... Like who puts 280+ cams in a car that can only safely rev to around 7500rpm? Nah, just rev the f**k out of it until it blows and sell it to someone. lol.

Glass houses...

Oh, and now you're using bold, underline, and larger text. wow. Talk about defensive about something.

Edited by The Mafia

I had nothing to do with the setup. Simple.

Believe what you want, You're throwing blame at me, and I'm here, The person you're blaming, silencing that. Why? Because I can. I dont tune, I have no f**king time for it with my own shit.

The only wideband I have, was bought late last year as a permanent install.

would definitely tune on a stock narrowband. cause that's smart!

It really sucks, this thread was going great until page 21. As soon as dysonest starting posting. He literally off the bat started the slander and trouble. Goes to show the type of person he is and how a select few of you follow like sheep. Its kind of depressing that people have nothing better to do than to run people down to make themselves feel better.

f**king disappointed. Everyone was having a decent yap about Mackay and imports without any trouble or slander what so ever.

And I admit that I shouldn't have reacted as bad as I did but after a while you just get pissed off from some asshole with a shit attitude and view on life and other people.

Edited by The Mafia

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...