Jump to content
SAU Community

Recommended Posts

Ok i was aware of their heater hose sets as i have one of them lined up but i wasnt sure they had a complete set with every single little hose lol. If i do it i wanna replace every one of the vacuum and coolant ones. I reckon it'll be alot cheaper to buy lengths of straight tubing and just cut it to size.

I have got onto a Samco distributor that can supply me with a heater hose set and radiator hose set. They also have every other silicone hose known to man. All the hoses that i need to replicate are laid out and i think the soft silicone tube will make the bends. I'll keep you all posted with updates. Next step, as i think i already mentioned, will be picking up the throttle bodies. I'll try to get that done in the next couple of weeks :down:

Uni-coils. Yeah thats an idea if it comes to that. I think you mis-understood me. I am getting Samco radiator hoses in a proper kit that are made to fit like OEM. Aswell as a heater hose kit. The ones i will be making up will be just the 9.5mm coolant hoses that run across the front of the timing cover and there is one that runs around the right side rear corner of the cylinder head. I'll probably use the same stuff for the vacuum supply hoses for the brake and clutch boosters if it will look ok. The Samco products are quite well priced which i was pleased to find :)

  • 2 weeks later...

Planning to pick up the rebuilt throttle bodies this week coming after work one day. This will hopefully be one of the last bigger spends that i will have to make on the engine. I have added some updated pics of the engine since properly fitting all the coolant and vacuum pipes to the turbo side of the engine. Its now complete minus the silicone tubing and the chrome plated twin turbo pipe and the one that feeds it off the rear turbo.

On another note who can tell me if the Wurth thread tape will hold up against the high temps seen on the o2 sensor adapter threads?? It melts instantly with a flame but they will only really be subjected to high temps not direct flame. Im worried about this so can someone help me out?

Deren

post-14108-1209795019_thumb.jpg

post-14108-1209795048_thumb.jpg

post-14108-1209795078_thumb.jpg

Edited by Godzilla32

Deren, without checking back through your posts, but did you end up painting those turbine housings? I like the finish on the heatshields too...looking mint.

Cheers

Brendan

(the other anal retentive car nut)

Hey Brendan, we are 2 of a kind it seems.

I couldnt afford to coat anything with heat proof finish unfortunately. As it is im about 1 million billion dollars over budget. No wait...whats a budget? Oh yes, that figure i once had in mind of spending.. Im trying not to leave anything out that i can't do later but within reason. This project has gone from a accident repair and nice paintjob to a fully blown ground up rebuild. If i don't draw a line on some areas i will never get it done on my wage.

Im currently working on my external oil return made up with genuine Earl's braided perform-o-flex hose, and swivel-seal fittings. Im also organising chrome plating of the inlet plenum and the twin turbo pipe.

Ive kept an eye on your Silv blog. I like what you have done, very tasteful :thumbsup:

Thanks mate, yeah i know its worth it :( Just hard to wait this long.

Tonight i picked up my rebuilt throttle bodies and had a good chat to Will at JHH. Nice guy.

I hope they provide me with a nice, smooth, low idle! Similar to how it was before i messed around with them.. lol

post-14108-1210075226_thumb.jpg

Hey Deren, I don't see any sealant around those.....going to put a little in just to be sure or does he think it will be ok? Not that I can really see the interface that needs sealant from this angle......

I've been trying to help a few other guys that are OCD and pulled their TBs off, then cleaned all the "gunk" out and now can't idle lower than 1500 :) No reports if they have resealed and had success yet.

Hey Geoff, No they have advised me that is a bad idea and wont be necessary. They are very finely machined so only about 1 thou clearance around them to prevent sticking throttle plates. Will at JHH actually advised me the idle may actually be too low initially and require extra bypass air or even to have to crack the throttle plates a tiny bit. Now wouldnt that be nice :D Would really make the $600 worth while. Considering i have spent well over a $1000 dollars on trying to fix these bastards now im hopeful its fixed! Shame i didnt know brand new ones from Nissan were available to me at $1000 bucks complete with linkage arms etc. RRP might be more though.

Ron, i have kept busy ;)

Originally I had them done at a place in Melbourne, but the business was going down and screwed me over. So i wouldnt reccomend them for the simple reason of...I just had them redone properly! Look for automotive engineering shops that do alot of machine work on late model jap engines and you will find some of them do a fair bit of throttle body work.

A few quick shots. Looks a bit of a mess at the moment, needs to have cables plugged in and tied away. Dirty finger marks cleaned off. Still, its coming together and looking pretty sweet. The end result will be one clean Rb26 unit! :w00t:

post-14108-1210245399_thumb.jpg

post-14108-1210245455_thumb.jpg

post-14108-1210245482_thumb.jpg

Some more pics of ancillaries fitted :) Its getting closer now!

Things still to do:

Have the plenum, twin turbo pipe and the feed from the rear turbo chrome plated

Purchase, assemble and fit the Earls external oil return

Purchase and fit all new Samco coolant hoses and vacuum tubing

Ultrasonic injector clean and flow check

post-14108-1210325230_thumb.jpg

post-14108-1210325251_thumb.jpg

Edited by Godzilla32

Thanks mate, i was thinking the other day just since moving here to QLD the amount of cash ive poured into the GTR i could have easily bought a $30,000 sports car :domokun: It'll be one nice GTR but if there was no accident to spur me on to do this build i could have had 2 sports cars. My dream is to have an S15 as a daily car..

Deren

Wait until the GTR is fresh and handling well mate. The S15 dream will disappear pretty quickly, especially since they have spaghetti for gearbox parts in the 6 speed. So it would be a labour of {something....certainly not love} once you feel the urge for some extra go. I drove one once, and it was ok and they look alright but just so not a Skyline. It was a tighter fit than a GTR32 for me and I recall you aren't so little anymore :)

This is something special happening though. I remember how much you were into it before you started the massive build and I doubt I will ever see the day you get rid of this one, just as I plan to have the 33 forever, and plan to die in it when it all gets too much.

Have you thought about protection? I recently picked up a car bra for the 33 on ebay for about $120 second hand but almost unused. Sure thay look crap and wanky but after I get the paintjob I will want to have it and like the idea of being able to remove it for paint maintenance. Plus I see a number of the cars that P1 Supercar club that I have driven are protected by a thin film of tough plastic over the front panels which I was contemplating until the car bra popped up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, they'll do it without a receipt, tell em roughly when it was, that it was cash, youll likely only get store credit, but that gets you some dollars towards the newer better shovel, or other item you need/want later.   Still take it back and have a crack at returning it.
    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
×
×
  • Create New...