Jump to content
SAU Community

Recommended Posts

Who is John Dumbrose?

last time I had a disagreement, it was handled by Reno Marcheesi - and it was exactly as you said - WA not being kept up to date by DOTARS.

Reno was excellent, as soon as he had the up to date information available (I called DOTARS and asked why they didnt have it) there were no more problems.

Pretty reasonable guys as a whole, just doing a job.

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

well a month a go or so..i took my Type R to the pits in midland..didnt pass cause indiacators were low..and pod filter had no bracket..some indian guy checked it out and was a tight ass..so next day took it to Warwick Pits

...passed spot on with no problems..

had a GTR front kit..and the indicators were still lower then the legal limit..but they were easy going guys and let me off..was under by about..70mm..and car was rolling on 18inchs too...

should give Warwick a go early in morning..like realy early..

but with my R33 now...havnt been pits yet and hoping i dont have too ...:S

Edited by viet_boi

the whole system is a crock of crap sorry to say they can pretty much keep failing you everytime if they feel like it and thats not rite the fact u can fail at one pits and pass at another is pretty stupid

im about to take my car through for a second time fingers crossed i pass coz im so over it, i have never even modified mine

and yeh ive been told they cant check stuff that isnt written on your slip is this right or wrong coz i got done for things that werent written on the sheet funnily enuf nothing that was on the sheet was brought up

I also have a similar kit.. Will post a pic shortly.

Edit: There, uploaded.

ShaydeSpec002.jpg

I think ur's will pass before mine, because yours meets the 400mm from the side and over 300mm from the bottom 'rule'. Im taking my bumper off tomorrow and taking it to Altec panel and paint in maddington to have them fix the cracks in it, and mount it with some new 'visable' indicators.

Then i will be up for round 3.

  • 2 months later...

yea i got hassled by the pols a couple nights ago

stopped me for a good 30min searchin every bit of my car and tryin to pick on it , last thing they could come up with was my car was too low cause they couldnt put a finger between rear tyre and guard... just whipped out my permit for 'sports suspension' and on my way i went , dosed them hard too when i left for wasting my time!

"...Reno was excellent, ..."

Hes the man, helped me and some mates out with our convertable going back oooo ten years ago . Good human

got done again today. for "Suspension in the front - NO GIVE". Factory suspension.

Gotta go to EAST PERTH as stated on the sheet. I Hate Lyf.

Jeez, you just got that thing and youve been stickered twice, damn!

Dude is there something your doing wrong when you get pulled up. ie excessive noise, turning the tyres etc before the stop or giving the police lip during the stop.

yea i got hassled by the pols a couple nights ago

stopped me for a good 30min searchin every bit of my car and tryin to pick on it , last thing they could come up with was my car was too low cause they couldnt put a finger between rear tyre and guard... just whipped out my permit for 'sports suspension' and on my way i went , dosed them hard too when i left for wasting my time!

oooo adam is hk. ahhahahahaaa jk

well check this out a while back, i just parked my car and these cops like parked behind my car and stoped me from walking, then asking me do i have a number plate at the front of my car. (was parked in front of a tree) i was like yeah, so they looked at the front seeing that the number plate was on the right side of the car and they were like it either has to be in the middle of the left. they didnt give me a yellow cause i told em that i have been passed the pits twice with it like that and also i have been like pulled over like 10 times now for just random license checks and such and non of em saying stuff about my number plate being on the right hand side

well check this out a while back, i just parked my car and these cops like parked behind my car and stoped me from walking, then asking me do i have a number plate at the front of my car. (was parked in front of a tree) i was like yeah, so they looked at the front seeing that the number plate was on the right side of the car and they were like it either has to be in the middle of the left. they didnt give me a yellow cause i told em that i have been passed the pits twice with it like that and also i have been like pulled over like 10 times now for just random license checks and such and non of em saying stuff about my number plate being on the right hand side

Why put the plate on the right? You know the answer and so do police. Its the same as not having the plate on or bending the plate. Just be thankful they didn't yellow you. Sh*t like that is what they pick on and yes its all their fault. Obscuring your plate is an offense and you can cop a $100 fine and a yellow sticker. If I were a cop I would do the same for your stupidity.

Edited by Tofu

I took an imported fully kitted supra over the kelmscott pits back a year ago, the older chap let a ton of things slide as long as I "promised to fix them" or I told him that "I have the part on order", but he threatened to fail my car if I didn't stand away to the side and stop talking (distracting him) hehehe. Seemed like a nice enough bloke :devil:

Obscuring your plate is an offense and you can cop a $100 fine and a yellow sticker.

I copped that exact punishment once (100fine and sticker) but what they deem as "obscuring" can be percieved in many ways, it's more the interpretation of the law. I practically sucked the officers dick being a kiss-ass and apologetic (even though what he deemed as "obscuring" wasn't really obscuring) and they still gave me a sticker.

Guys - we all drive imports, it's what happens. Any more "I got a yellow" threads and I'm going to cut myself. Sheesh!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...