Jump to content
SAU Community

Recommended Posts

hi

The other day i ran my car till it was almost empty (something which i NEVER do). The gauge had about 1mm before it hit the empty line.

When i was filling it up, the car only took 43L. When it should be a 65L tank.

So it takes no expert to work out that my fuel gauge is out by 22L.

Moral of the story, does anyone know how to fix this problem or should i just take it to a proper mechanic?

thanks

by the way its a S1 R33 GTS

Edited by R33_Rob
Link to comment
https://www.sau.com.au/forums/topic/141715-fuel-gauge-out-by-22l-o/
Share on other sites

hi

The other day i ran my car till it was almost empty (something which i NEVER do). The gauge had about 1mm before it hit the empty line.

When i was filling it up, the car only took 43L. When it should be a 65L tank.

So it takes no expert to work out that my fuel gauge is out by 22L.

Moral of the story, does anyone know how to fix this problem or should i just take it to a proper mechanic?

thanks

by the way its a S1 R33 GTS

Ummm correct me if i'm not reading this right...ur fuel needle hasn't even reached the empty line? Usually it goes beyond the empty line before you actually run out. Also when the warning light comes on, u should still be able to get around 50ks more. I don't think there's anything wrong with ur gauge at all..but I could be wrong.

I'm with Nismo on this one. Mine would probably only take just over 40L if it above tthe E mark. Once it gets on the E mark its about 45-50L and I can still drive around on the E mark before the warning light shows, which is still 7-8L in the tank I believe.

Seriously though, I wouldn't worry until the warning light comes on.

Fixxxer :(

you will find most cars do this. that is because the car companies know that as a whole, humans are stupid animals. many people will be on a trip somewhere, 50ks from a servo when they happen to take a look at the gauge and see that it is nearly empty. so they need a saftey net.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...