Jump to content
SAU Community

Recommended Posts

Does anyone know of a good brand/model of tyre that grips fairly well in the wet? I've heard good thinkgs about Yokohama A539's but I don't remember seeing any comments about their wet weather capability.

Dry grip is also important, but not if the grip is sub-par in the rain. I also don't mind if the compound is slightly softer than normal if it has improved grip to show for it, but I'm not after the absolute best/softest/most expensive set. Preferably something below $200 per tyre.

Oh, and they also have to come in sizes 235/17/45 and 255/17/55, and Z-rated.

Is there a site reviewing different types of tyre? I found one sometime last year that was based in America, and it actually had figures submitted by readers, for grip, performance, noise, etc. But being in America most of the model numbers didn't match up to what we have here.

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/
Share on other sites

I don't think I can afford the Bridgestones :D

I actually had Marshal Power Racer 2 tyres put on the front a couple of weeks ago, they were $165 each, plus $10 or $20 each (I forget) to fit and balance them. Yeah, I'd never heard of them either :D

I only got them because I discovered that due to a bad wheel alignment my Nankangs were down to the steel belts (!) on the inside edges, which I never noticed when checking my tyres. I had virtually no spare money so I had to get the cheapest of whatever was available.

I'm not really sure how good/bad these tyres are. When I took the car out at first they were awful, but a couple of days later I discovered that the alignment I had done actually made the alignment WORSE! It was so bad, that on that shiny underground carpark concrete, the tyres would squeal like a bitch even in a completely straight line. They also feathered only after a couple of hundred k's. After I had the alignment re-done properly I never managed to push the car very hard. I'll see what happens this weekend if the weather fines up.

They seem to be ok for such a cheapass tyre, they've got that flange on them to protect your rims too.

The reason why I'm inquiring about tyres though is my rears are wearing thin and I was considering getting rid of the Marshals on the front and putting good stuff all round when the time comes.

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/#findComment-286204
Share on other sites

I got A539s fitted the other day 235/45 17 all round, and so far I think they are great. When I got the car it came with Federals and the A539s are light years in front of these tyres in ALL conditions. I really couldn't afford them at the moment but I can testify with this car and others you pay for what you get. One of the best investments in performance handling will come from your tyre choice. Make a wise choice!

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/#findComment-287020
Share on other sites

JimX: Nankangs :P I had them once on my last car, NEVER again!

On my last car (2001 Astra (FWD)) I found the best all round tyre (particularly in the wet) were GoodYear Eagle F1s. The only problem is they won't come in your width (or mine!).

I have Falken Ziex front and back on 18s and I think they are good in the dry but pretty average in the wet. I have 235s on the front and 265s on the back. Next time I'll try the Dunlop FM901s that Duncan mentioned.

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/#findComment-288946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...