Jump to content
SAU Community

Recommended Posts

Was up at race solutions this afternoon checked out your car very nice looks comfey inside . I thought the bubble on the back of the roof was a brake light till Matt said it was an aerial maybe I should get onea them for mine look good

Cheers Peter

  • Replies 147
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I don't know didn't ask the question ,tried to look after you gave em a little job and said its got priorty over everything somehow I dont think he beleived me :blink:

Cheers Peter

  • 2 weeks later...

Haltech are making a 20B loom for their E11V2 ECU - also doing some software changes to accomodate the Cosmo ignition system. Using my car to test everything..

All that should be done now - so we should be getting into the good bits soon. I haven't spoken to Matt for a few days - but I know Maroun is chanting at the bit to get started (and so am I).

More soon ......

226rwhp is the baseline.

Which is shit - OEM ECU is crap and running hell rich.

Next milestone is the new ECU with the stock setup - Hitman (matt) is uber confindent that we will get MUCH more power and economy, just with the ECU replacement.

Haltech are still working on ignition code and should be finished monday or tuesday - So that is the next dyno run.

After that - Compression check, full service and all the good bits go on.

More to come.......

226rwhp is the baseline.

Which is shit - OEM ECU is crap and running hell rich.

Next milestone is the new ECU with the stock setup - Hitman (matt) is uber confindent that we will get MUCH more power and economy, just with the ECU replacement.

Haltech are still working on ignition code and should be finished monday or tuesday - So that is the next dyno run.

After that - Compression check, full service and all the good bits go on.

More to come.......

this is before the t04 is fitted yeah?

YES mate - it's all still stock as a rock - they are getting the ECU right first - then fitting the good bits.

So the order of things goes like this:

1) Dyno run as I dropped it off to them - 226RWHP - Completed.

2) Install & tune the Haltech E11V2 ( so they can get a basemap for Haltech, so they can sell to other Cosmo owners whio just want the ECU changed) - Not completed

3) Dyno with just ECU and stock everything else. Not Completed

4) Fit the good bits (1600cc inj's, TO4Z, Fuel Pump, etc) - Not Complete

5) Tune with new bits - Not Complete

6) Dyno the final product - Not Complete.

So far we are between step 1 and 2

YES mate - it's all still stock as a rock - they are getting the ECU right first - then fitting the good bits.

So the order of things goes like this:

1) Dyno run as I dropped it off to them - 226RWHP - Completed.

2) Install & tune the Haltech E11V2 ( so they can get a basemap for Haltech, so they can sell to other Cosmo owners whio just want the ECU changed) - Not completed

3) Dyno with just ECU and stock everything else. Not Completed

4) Fit the good bits (1600cc inj's, TO4Z, Fuel Pump, etc) - Not Complete

5) Tune with new bits - Not Complete

6) Dyno the final product - Not Complete.

So far we are between step 1 and 2

yay :)

i just assumed that as its been there a few weeks already they would have dyno'd it before now hence my confusion...

but coolio

cant wait for updates :)

Jimbo

Haltech have finalised the new code for ignition - a bit tricky the way it had to be done.

260 HP at the wheels with just the Haltech - standard boost 11.5:1 accross the board.

Engine is a little bit low on compression - but nothing to stop the next stage.

Stay tuned.

  • 1 month later...

Since engine was low on compression and I didn't want to risk anything - Have decided to go with a full race prep engine rebuild - which is why this is taking so long.

Fully Dowled block

Mild Ext. Port

Race seals and spring

The whole shebang

then all the good stuff goes on

Should be ready end of Jan.

Yeah Pete,

They were gone a long time ago - all three std cats have been given the boot. Actually the whole std exhaust has gooooone - Have a nice brand new shiny 3" -> 2 x 2.5" system with one big i flow cat. no resonator and two cannons at the rear - Zorst is FREE FLOW man

Since engine was low on compression and I didn't want to risk anything - Have decided to go with a full race prep engine rebuild - which is why this is taking so long.

Fully Dowled block

Mild Ext. Port

Race seals and spring

The whole shebang

then all the good stuff goes on

Should be ready end of Jan.

Good.. told you not to bother with an unopened motor :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...