Jump to content
SAU Community

Recommended Posts

Hi all I have been looking at some R34 GTT and some people have been telling me that its hard to pull out power from this car, I was wondering for those who have R34 whether this is true. I would gather that the car is slightly heavier than a R33 GTST, but what do guyz reckon

Thanks in Advance

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/
Share on other sites

I dont see how it would be any different than extracting more power from a 33. The 34 gtt has a slightly bigger cooler and slightly less restrictive exhaust, hence doing a cooler and exhuast to it will reap slightly less results than in a 33 gtst. But then again you have more power and torque to begin with...

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2641798
Share on other sites

Hi all I have been looking at some R34 GTT and some people have been telling me that its hard to pull out power from this car, I was wondering for those who have R34 whether this is true. I would gather that the car is slightly heavier than a R33 GTST, but what do guyz reckon

Thanks in Advance

Those ppl that are telling u this...have any of the driven or owned a 34 gtt?

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2641805
Share on other sites

$4200 and you will have around 230-250rwkw

FMIC $400 (any cheapy copy)

Turbo Back Exhaust $1000

Slide Turbo $900

Power FC $1000

EBC $400

Fuel Pump $200

FPR $200

Pod Air Filter $100

* Above prices are rough estimates; obviously prices fluctuate and change depending on when you get it and what you get.

It's not hard to draw power from the R34GTT; most of the members here have done the pioneering "research" into what works and what doesn't so all you have to do is read and fork out the cash.

NOTE:

* Auto R34GTTs are a complete headache to modify; I've spent a tonne of hours and dollars going around in circles trying to make things work (yes, one of the pioneers here). So even though you might save a few thousand on the cost of the car; you definitely won't keep that in your wallet for long once you start modifying :happy:

* Manual R34GTT; just follow the conventional methods of modification to any turbocharged car (except for the Cam gears, they do nothing)

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645109
Share on other sites

NOTE:

* Auto R34GTTs are a complete headache to modify; I've spent a tonne of hours and dollars going around in circles trying to make things work (yes, one of the pioneers here). So even though you might save a few thousand on the cost of the car; you definitely won't keep that in your wallet for long once you start modifying :happy:

Just wondering stan.. besides not being able to run a PowerFC on an auto GTT - why is it so difficult?

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645118
Share on other sites

Hi all I have been looking at some R34 GTT and some people have been telling me that its hard to pull out power from this car, I was wondering for those who have R34 whether this is true. I would gather that the car is slightly heavier than a R33 GTST, but what do guyz reckon

Thanks in Advance

lol mate were they wogs driving VLs?

theres so many members on here who have turned their stock 34 into a monster with some simple mods....

34s aint JUST a bigger cooler and a less restrictive exhuast....the engine....compared to a r33 is also better. being a new NEO version of the RB25DET it has alot more advantages over the 33.

aside from all that im sure theres also alot more

i watched a import mag dvd where it showed a r34 gtt being dynoed and it gained an extra 10kws from a turbo back exhaust. increasing the boost to .85 bar gave the rear wheels 200kws

i dunno maybe dats jsut me but i think dats pretty easy.

Edited by anDru
Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645135
Share on other sites

Just wondering stan.. besides not being able to run a PowerFC on an auto GTT - why is it so difficult?

Well you answered your own question didn't you Howie :happy: 1) It's auto, weak gearbox that will blow up on you if you don't do something about it. 2) The auto zaps a fair amount of power from what you are making and 3) the auto ECU is both a masterpiece and a freak of programming nature.

Sure you can stick with your SAFCs etc but soon you'll realize it just isn't enough. 3 options: 1) HKS F-CON V Pro, 2) PowerPlay Rom Tune and 3) Greddy E-Manage Systems

theres so many members on here who have turned their stock 34 into a monster with some simple mods....

34s aint JUST a bigger cooler and a less restrictive exhuast....the engine....compared to a r33 is also better. being a new NEO version of the RB25DET it has alot more advantages over the 33.

aside from all that im sure theres also alot simple

R34GTT also has a bigger turbo - most of you have forgotten this one which is the main reason for the power difference.

Other things different; the brakes, the suspension, the HICAS system, electronics, NCVS etc etc.

Companies don't release a new variant of a car to make it take steps backwards; they release them to show what new and IMPROVED things they've done to it.

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645161
Share on other sites

Companies don't release a new variant of a car to make it take steps backwards; they release them to show what new and IMPROVED things they've done to it.

i dunno man....ive been hearing alot about mitsubishi and their evos.......

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645170
Share on other sites

Thanks stan that's what i pretty much though as well. So say i'm just chasing 200rwkw i'd be alright with the tiptronic? I just like the auto cuz i'm a lazy bugger these days :happy:

You'll be fine :happy:

i dunno man....ive been hearing alot about mitsubishi and their evos.......

Try telling that to the race team accross the road from us...

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645211
Share on other sites

i was told by a 33 owner at dyno day my 34 was putting out the same power as his 33. we had the same mods ,the only difference was he had a power fc and i didn't. i was also hitting r & r. all depends on how much money you throw at it.

him having a powerfc and yours not having one (and hitting r&r) is a pretty big difference in my opinion.

If you put a powerfc on yours (assuming its manual) the gap would open up a fair bit I'd imagine.

Simple fact is, you can get power out of a 33 or 34. They're both very well built and can handle much more than they came out the factory with... :)

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2646072
Share on other sites

34s aint JUST a bigger cooler and a less restrictive exhuast....the engine....compared to a r33 is also better. being a new NEO version of the RB25DET it has alot more advantages over the 33.

I never said they were JUST a bigger cooler an exhaust, i was merely giving an example such as doing an exhaust mod on a 34 compared with a 33...

Any one who thinks it would be hard to extract power from a 34 would have to be nuts

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2647118
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...