Jump to content
SAU Community

300rwkw Challenge

smok3y

By smok3y,
in General Automotive Discussion

 Share

Recommended Posts

DJ Brave Experienced

DJ Brave

Posted
Posted

It would be an interesting contest but i reakon that the skyline would have better final drive ratio than the commondore, giving it more acceleration. With the same, power in a lighter car, with better gear ratios i think the skyline would do it. But, obviously the commondore i would expect to have a fare bit more torque so as i said , it would be an interesting race.

It would be torque Vs ratios!

Busky2k Veteran

Busky2k

Posted
Posted

The VT will get a better launch thanks to an auto but if its a decent drag strip where you can go for at least 400m or longer, the GT-T will own the VT as its a good 300kg lighter.

Mind you 300rwkw VT Auto thats N/A is pretty hardcore.

Freddy Kruger Mentor

Freddy Kruger

Posted
Posted

theres a tone of factors. what mods to the diff etc of the VT? is it a series 1 or 2. is the transmission been kitted or anything? what tyres are they running?

what time would a 300rwkw r34 run?

oh and autos run quicker and more consitent times than a manual. :laugh:

yoshimitsu9 Contributor

yoshimitsu9

Posted
Posted

this would a very close race.

i can tell u guys now that the ls1 is going to be pumping 300rw/kw just by doing exhaust alone (my mates dad spent $3500 on extractors alone on his vt series 2 and the rest of the exhaust and got 300rw/kw) remember in europe and US ls1's come with 400bhp from the factory :)

and yes i would like to know what a 300rw/kw gtt would run

mitchy_ Grand Master

mitchy_

Posted
Posted
this would a very close race.

i can tell u guys now that the ls1 is going to be pumping 300rw/kw just by doing exhaust alone (my mates dad spent $3500 on extractors alone on his vt series 2 and the rest of the exhaust and got 300rw/kw) remember in europe and US ls1's come with 400bhp from the factory :)

and yes i would like to know what a 300rw/kw gtt would run

you sure?

ive seen alot of LS1's get 300rwhp from exhaust/intake/mafless tune, but not 300rwkw

yoshimitsu9 Contributor

yoshimitsu9

Posted
Posted (edited)
you sure?

ive seen alot of LS1's get 300rwhp from exhaust/intake/mafless tune, but not 300rwkw

hmmm maybe i remembered incorrectly. with the LS1 unlock theres ure 300+rw/kw(would be either europes or US's ecu map) right there. either way its shit cheap to get big power figures out of the ls1's

Edited by yoshimitsu9
Robo's Mentor

Robo's

Posted
Posted
also aussie ls1s are 5.7L compared to the yank 4.8L or whatever it is...

with an ls1 all you need is extractor exhaust intake and tune and youve got 250+rwkw easy as. not bad for $3k mods or so.

The problem with the Aussie Ls1's are the tune. Get a good tune, extractors and twin 2.5 exhaust and a decent OTR intake and you'll be pushing 250rwkw, good easy bolt on mods. Injectors won't give you anymore power. With cam will make you around 280rwkw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • ARB26
      GTR-Registry.com Presents: The Stagea Collection (all Stagea VIN/colours/types/options etc)

      By ARB26 · Posted

      Website is down
    • soviet_merlin
      NC MX5

      By soviet_merlin · Posted

      There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...