Jump to content
SAU Community

Recommended Posts

My calculations are as follows: 1PS = .7355KW thus 579PS = 425KW and YES this must be measured at the crank.

Hi Elithar, if the engine is in good condition and the tuning is good, there is no reason why the RB20 won't make the same max power as an RB25 with the same mods, condition and tuning.  So almost 200 rwkw is entirely possible.   Average horsepower is of course a different question entirely, the RB25 is after all 25% larger.

Hi jezzrrr, let me use my sceptical bone here, what if the only reason the HKS supported workshops are using GTSS's is because it's "new" and there is money to be made.   What would be the point of pushing 2530's?  They are "old" news and everyone knows that "newer" must be better.

Looking at the GTSS power claims, 579 rwps, that's around 310 rwkw.  I have seen 330 rwkw out of a pair of 2530's locally in Shoot Out mode on a Dyno Dynamics.  But the extra 20 rwkw is not the point, it's how it gets there that is important.  Somewhere around I have seen the dimensions of GTSS's and they looked remarkably similar to 2510's.  The HKS ratings are;  

GTSS 300 ps

2510 310 ps

2530 320 ps

2535 340 ps

2540 350 ps

2540R 370 ps

2835 380 ps  

HKS rate the GTSS lower than a 2510, and I have driven a GTR with 2510's and it was awesome up to 7,000 rpm then it went flat line.  It felt like it had some boost just above  idle rpm, which is totally alien in a GTR, where the real pleasure for me comes from giving them a rev.  The guy who owned it loved it like that as he just stepped out of a grunter 6 litre Commondoor.  If HKS (and Garrett) had found a combination of compressor and turbine that gives a GTSS the bottom end of a 2510 with a slightly better top end, then for some people that would be perfect.  But I keep going back to the fact that HKS don't rate them with the same max power as a 2510, therefore they themselves are saying GTSS's have a lower top end than 2510's.

So, like many others, I await Merli's results with great interest.

  • Replies 283
  • Created
  • Last Reply

Top Posters In This Topic

I can recall a post from someone with some credibility on these forums claiming that

we typically see 50 kw losses through 2 wd Skyline and 65 kw losses in 4 wd
. Taking that off the 576.2ps (423.79kw) gives you 358.79AWkw. Quote some number.
I can recall a post from someone with some credibility on these forums claiming that . Taking that off the 576.2ps (423.79kw) gives you 358.79AWkw. Quote some number.

Absolutely, I went for a ride in a car with GTSS's and it blew me away, it was a RB26 DETT lobbed into a GTS-T (ie rear wheel drive) the thing had NO traction in 1st or 2nd and you had to back off in third to get traction. It was pulling around 450RWHP at the time, which is a big figure in anyones speak. Without a doubt one of the most impressive rides ive had in a skyline.

Jeremy

Steve... Those power figures on the Phoenix Power site are engine hp figures, not wheel hp.

that explains a bit, but I was just going off SKs post. still seams like a hell of alot of driveline loss. Also, SK talks of 330rwkw from 2530, so that means, from the same loss, 115kw loss for rw drive (330rwkw for 2530 vs 310rwkw for GTSS)

either way, I still think that SKs sceptical bone needs a recalibration:D:P

Hey guys, give me a break here, it was a hard Saturday night, alright?

OK, this is how I do the engine PS to rwkw calculation in a GTR.

579 ps X 0.9 = 521 bhp

521 hp / 1.34 = 388 kw

388 kw - 78 kw = 310 rwkw

Chris is right I use 60 'ish kw losses for (big gearbox and drive train) rear wheel drive Skylines (R33 and R34) and 50 'ish for (small gearbox and drive train) R32 GTST's. But this was an R34GTR so with them I have found it necessary to run the transfer case and centre diff and disconnect the drive shaft. So I added 8 kw to my usual losses on an R33 GTR in 2wd and 18 kw on an R32 GTR in 2wd. Experience tells me that a GTR looses about 85 kw in 4wd drive, so I don't think 78 kw is too far wrong.

So maybe my sceptical bone is out by a few kw's, Jack Daniels will do that to you. But I don't think it alters the argument.

As for HKS revising their max power outputs on GTRS's, well there are two answers to that one;

1. HKS are so dumb they published the figures first with out testing them properly. But the Pheonix car only made 579 ps (that's 290 ps each) which is a lot closer to the 310 ps rating than it is to 330 ps.

2. HKS want to sell more GTRS's

Either way, it makes my sceptical bone ache a little more.

Hey guys, give me a break here, it was a hard Saturday night, alright?

OK, this is how I do the engine PS to rwkw calculation in a GTR.

579 ps X 0.9 = 521 bhp

521 hp / 1.34 = 388 kw

388 kw - 78 kw = 310 rwkw

Steve is right I use 60 'ish kw losses for (big gearbox and drive train) rear wheel drive Skylines (R33 and R34) and 50 'ish for (small gearbox and drive train) R32 GTST's.  But this was an R34GTR so with them I have found it necessary to run the transfer case and centre diff and disconnect the drive shaft.  So I added 8 kw to my usual  losses on an R33 GTR in 2wd and 18 kw on an R32 GTR in 2wd.  Experience tells me that a GTR looses about 85 kw in 4wd drive, so I don't think 78 kw is too far wrong.

So maybe my sceptical bone is out by a few kw's, Jack Daniels will do that to you.  But I don't think it alters the argument.

As for HKS revising their max power outputs on GTRS's, well there are two answers to that one;

1. HKS are so dumb they published the figures first with out testing them properly.  But the Pheonix car only made 579 ps (that's 290 ps each) which is a lot closer to the 310 ps rating than it is to 330 ps.

2. HKS want to sell more GTRS's

Either way, it makes my sceptical bone ache a little more.

Hey guys, give me a break here, it was a hard Saturday night, alright?

OK, this is how I do the engine PS to rwkw calculation in a GTR.

579 ps X 0.9 = 521 bhp

521 hp / 1.34 = 388 kw

388 kw - 78 kw = 310 rwkw

Chris is right I use 60 'ish kw losses for (big gearbox and drive train) rear wheel drive Skylines (R33 and R34) and 50 'ish for (small gearbox and drive train) R32 GTST's. But this was an R34GTR so with them I have found it necessary to run the transfer case and centre diff and disconnect the drive shaft. So I added 8 kw to my usual losses on an R33 GTR in 2wd and 18 kw on an R32 GTR in 2wd. Experience tells me that a GTR looses about 85 kw in 4wd drive, so I don't think 78 kw is too far wrong.

So maybe my sceptical bone is out by a few kw's, Jack Daniels will do that to you.  But I don't think it alters the argument.

As for HKS revising their max power outputs on GTRS's, well there are two answers to that one;

1. HKS are so dumb they published the figures first with out testing them properly.  But the Pheonix car only made 579 ps (that's 290 ps each) which is a lot closer to the 310 ps rating than it is to 330 ps.

2. HKS want to sell more GTRS's

Either way, it makes my sceptical bone ache a little more.

1PS = .7355KW

1HP= .7457 KW

Also we are talking about GTSS's here, not GTRS's, must have been a good night in Sydney last night !

Cheers

Jeremy

Regardless of what some websites claim, I'm still pretty skeptical about the output of GT-SS turbos. Merli's car should be pushing them to their max flow, there's another R33 with them installed without internal mods (apart from cams). Will try to get a copy of a dyno sheet when it's available.

As to manufacturer quotes and idealised output ratings - can you tell me one manufacturer, distributor or turbo sales outlet who's turbos actually put out the power they claim? Even when used in a twin configuration the power is less than the sum of the two parts.

Oh, and I think we're pretty much splitting hairs on the whole GT-SS thing - until you see anything first hand I wouldn't believe it.

just my 2c,

we all know that on the HKS Japan website, they claim that the RB26DETT (with GT-SS turbos) makes 422kw (574ps) @ 7070rpm on 1.4kg/cm2, although has anyone noticed that the engine capacity of the RB26 has been increased to 2628cc over the standard 2568cc along with the 264/264 cams?

Also fyi, the wheel specs on the SR20DET GT-SS differ from the RB26DETT GT-SS where the SR20DET spec GT-SS has slightly larger wheels and an A/R .60 comp housing compared to the A/R .42 on the RB26 spec GT-SS.

http://www.hks-power.co.jp/products/turbo/...ss/ac_gtss.html

personally, i don't think the GT-SS (for the RB26) is rated at 320ps, i believe that it is a marketing thing and that it really is rated at the original 280ps.

again, this is just my 2c, so think of it what you will.

Yup :cheers:

Truth be told, I don't believe the new 320ps rating either... I think 280ps is more accurate, but I guess we'll see when my engine gets done.

With my engine build, I'll pretty much be able to push these turbos to their absolute limit, so we'll see what these babies can do! :):D

Elithrar: 200rwkw is reachable @ 15psi with the stock unit, pfc, fmic and zorst.

Merli: Have you considered 2510's. I have been for a ride in an R with them fitted and I must say lag was not evident at all. The vehicle was fitted with external wastegates in japan. Bit of a strange set up however the bottle neck up top may have been relieved some what with the higher flowing gates.

Boostd: nope, never considered them. For me, the choice was either the larger top end of the 2530s or the response of the GT-SS, and I went for the most responsive turbos I could find on paper, which were the GT-SS.

I also wanted to try something new and not follow the GT2530 bandwagon ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...