Jump to content
SAU Community

Recommended Posts

got to city west then had to leave, had an emergency to attend to :huh:

p.s. i heard there was engine revving at the second meet point?

sucks that u had to leave :S i met a few of the guys, was decent cruise but WAYYY too short, oh well. yeh, dunno how long you stayed aty first meet point but there was engiune revving there too haha, and there was only 3 meet points...lame ! didnt even use half a tank of petrol. my mate took lots of pics though, will get some of the decent ones up soon as i resize them.

yeh, it was crap how i had to leave, well it was good to have a chat to you jamie :)

slowpoke, i saw ya on the other side of the carpark and was gonna say hi a little later on but had to leave :)

as i was leaving i saw kylie and her stagea :)

it was a good turn out and a decent amount raised for adrian and family . it was good to see adrien actually on the cruise enjoying himself. my step kids had a ball taking bulk pics but i dont think many turned out too well

saw ya leaving sammy.. was gonna say hi until i noticed you were going. :)

saw R DIRTY 3 too.. but couldnt find the owner..

same with J TUNED..

people need tags on their shirts with their numberplate. :)

I was impressed with the turn out and the amount raised was something like $1300 so was not too bad.

Sam I saw you leaving... you need a booster seat :) :)

Parked next to Gazza and spotted slowpoke.

hehe i will say one thing, when i had my P's for the first few months i used to sit on a pillow under my seat cover lol :) but then i learned how to navigate were i was going without seein much lol

oh and mitchy, if you were the one in the white pants then yes i saw ya :P was gonna come over but had to go :(, i think you screamed out my name or sumthin :)

saw ya leaving sammy.. was gonna say hi until i noticed you were going. :sick:

saw R DIRTY 3 too.. but couldnt find the owner..

same with J TUNED..

people need tags on their shirts with their numberplate. :P

I was not at my car a great amount of time. I was with my mate (cruise virgin) with his RB25Silvia so spent most of time at meet points walking around looking/chatting.

Was a good quick cruise. Good to see the money raised. Enjoy your trip to America Adrian :mad:

Thanks to all the SAUWA people that turned up. was a great night. Sorry it was so short but that was due to the amount or cars we were expecting. we estimated that the regroup point were going to be quite long due to the amount of cars.

Adrian is off to the states in the start of December.

Thankyou all for your support.

Paul

Thanks to all the SAUWA people that turned up. was a great night. Sorry it was so short but that was due to the amount or cars we were expecting. we estimated that the regroup point were going to be quite long due to the amount of cars.

Adrian is off to the states in the start of December.

Thankyou all for your support.

Paul

Paul, thanx to SILWA for a well run cruise mystep kids had a great time running around with camera (pity the pics came out crap though).

Hope Adrian has a great trip

Killer cruise boyz, was bit short but :( Can't really have a controlled cruise with that many hoons :(

Think I was driving next to you along Thomas Road upto UWA to Canning Roundabout? I was the white dirty 32 with black rims that needs tune :) Guessing your [MY32GTR]...SEXY ride :)

Also seen SLOWPOK3 and heap of mates from the Silvia days who I still cruise with!

Killer cruise boyz, was bit short but :( Can't really have a controlled cruise with that many hoons :)

Think I was driving next to you along Thomas Road upto UWA to Canning Roundabout? I was the white dirty 32 with black rims that needs tune :) Guessing your [MY32GTR]...SEXY ride :(

Also seen SLOWPOK3 and heap of mates from the Silvia days who I still cruise with!

my number plate kinda does stand out heh? :(

Yeah all in all it was a respectable cruise.

I was bloody tired after the hill street meetup afterwards thou...Your car did rather well out there slowpoke felt sorry for that RX7 that seemed to have blown something after his heat with that WRX. how much boost was u running slowpoke?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...