Jump to content
SAU Community

Recommended Posts

got to city west then had to leave, had an emergency to attend to :huh:

p.s. i heard there was engine revving at the second meet point?

sucks that u had to leave :S i met a few of the guys, was decent cruise but WAYYY too short, oh well. yeh, dunno how long you stayed aty first meet point but there was engiune revving there too haha, and there was only 3 meet points...lame ! didnt even use half a tank of petrol. my mate took lots of pics though, will get some of the decent ones up soon as i resize them.

yeh, it was crap how i had to leave, well it was good to have a chat to you jamie :)

slowpoke, i saw ya on the other side of the carpark and was gonna say hi a little later on but had to leave :)

as i was leaving i saw kylie and her stagea :)

it was a good turn out and a decent amount raised for adrian and family . it was good to see adrien actually on the cruise enjoying himself. my step kids had a ball taking bulk pics but i dont think many turned out too well

saw ya leaving sammy.. was gonna say hi until i noticed you were going. :)

saw R DIRTY 3 too.. but couldnt find the owner..

same with J TUNED..

people need tags on their shirts with their numberplate. :)

I was impressed with the turn out and the amount raised was something like $1300 so was not too bad.

Sam I saw you leaving... you need a booster seat :) :)

Parked next to Gazza and spotted slowpoke.

hehe i will say one thing, when i had my P's for the first few months i used to sit on a pillow under my seat cover lol :) but then i learned how to navigate were i was going without seein much lol

oh and mitchy, if you were the one in the white pants then yes i saw ya :P was gonna come over but had to go :(, i think you screamed out my name or sumthin :)

saw ya leaving sammy.. was gonna say hi until i noticed you were going. :sick:

saw R DIRTY 3 too.. but couldnt find the owner..

same with J TUNED..

people need tags on their shirts with their numberplate. :P

I was not at my car a great amount of time. I was with my mate (cruise virgin) with his RB25Silvia so spent most of time at meet points walking around looking/chatting.

Was a good quick cruise. Good to see the money raised. Enjoy your trip to America Adrian :mad:

Thanks to all the SAUWA people that turned up. was a great night. Sorry it was so short but that was due to the amount or cars we were expecting. we estimated that the regroup point were going to be quite long due to the amount of cars.

Adrian is off to the states in the start of December.

Thankyou all for your support.

Paul

Thanks to all the SAUWA people that turned up. was a great night. Sorry it was so short but that was due to the amount or cars we were expecting. we estimated that the regroup point were going to be quite long due to the amount of cars.

Adrian is off to the states in the start of December.

Thankyou all for your support.

Paul

Paul, thanx to SILWA for a well run cruise mystep kids had a great time running around with camera (pity the pics came out crap though).

Hope Adrian has a great trip

Killer cruise boyz, was bit short but :( Can't really have a controlled cruise with that many hoons :(

Think I was driving next to you along Thomas Road upto UWA to Canning Roundabout? I was the white dirty 32 with black rims that needs tune :) Guessing your [MY32GTR]...SEXY ride :)

Also seen SLOWPOK3 and heap of mates from the Silvia days who I still cruise with!

Killer cruise boyz, was bit short but :( Can't really have a controlled cruise with that many hoons :)

Think I was driving next to you along Thomas Road upto UWA to Canning Roundabout? I was the white dirty 32 with black rims that needs tune :) Guessing your [MY32GTR]...SEXY ride :(

Also seen SLOWPOK3 and heap of mates from the Silvia days who I still cruise with!

my number plate kinda does stand out heh? :(

Yeah all in all it was a respectable cruise.

I was bloody tired after the hill street meetup afterwards thou...Your car did rather well out there slowpoke felt sorry for that RX7 that seemed to have blown something after his heat with that WRX. how much boost was u running slowpoke?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...