Jump to content
SAU Community

Recommended Posts

Hey guys sorry for he nrebie post but i'm rather new to skylines. I was just wondering how the Attesa 4WD system works for the GTR? Also is the R32 GTS4 equiped with the system? I know it controls the power of the rear and front wheels. Is there anyway to control it? like a swtich in the car or something? I was told by someone that the 4WD system for the GTS4 'switches around' the power differnential from front to rear based on road conditions. Is this true?Sorry once again for the newbie questions. Any advice is greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/14263-attesa-system/
Share on other sites

The GTR's AWD driveline is electronically controlled. ATTESA-ETS stands for Advanced Total Traction Engineering System for All-Electronic Torque Split. This is combined with an active rear limited-slip differential. The system monitors individual wheel rotation 100 times per second and can re-direct torque away from slipping wheels. What this means in plain english is that the GTR acts like a rear-wheel drive car most of the time until the rear tyres break traction. Then the torque split is 50-50 front to rear, gradually feeding torque to the front wheels. This is why GTR's are king at launching and for ultra-fast take-off's because the initial slip at the rear tyres prevents the engine from bogging down through too much traction.

The GTS-4 does not use the same AWD system.

Link to comment
https://www.sau.com.au/forums/topic/14263-attesa-system/#findComment-287967
Share on other sites

My bad! I didn't explain it properly. The GTS4 DOES have the ATTESA system, However, the calibration of individual wheel rotation is slightly different. Aside from this fact they are essentially the same. Both the GTR and GTS4 torque split is biased 100% to the rear wheels until they start to slip. When the system notices slip, the torque is re-directed and can vary to a maximum of 50-50 front-to-rear gradually feeding power to the front-wheels. To give an example of difference in each car: When gunning it out of a corner the GTS4 is much safer and more forgiving than the GTR. It won't get into such wild oversteer attitudes at such an early - and often unexpected stage. But what would you expect? One's a certifiable dangerous Group A weapon/legend and the other is a chuckable/fun sporty coupe.

Link to comment
https://www.sau.com.au/forums/topic/14263-attesa-system/#findComment-288540
Share on other sites

But back to the original question, does any one know about any devices that can control the torque split? I know its a pull a fuse in the r32, but what anout r33 and r34?

I saw an article in autospeed where they modified the sensors, but that sounded pretty bodgy to me. Any other way to control the torque split?

Link to comment
https://www.sau.com.au/forums/topic/14263-attesa-system/#findComment-290374
Share on other sites

I actually worked at Nissan in Japan for a couple of years and had some input into the Skyline range.

Naah j/k. I've just read-up heaps on GTR's & had some hands on experience. Farkin Luv Em :uh-huh:

I'm currently saving for an R32 GTR to buy @ the end of the year. Still considering whether to go through with it or not coz of the daily driver aspect and just general concern. I've driven one before but don't know how that'd go on a daily basis. This is why i'm also considering a heavily modded 33GTST. But I'd rather Godzilla coz there's sumpin bout the feel of the car that just does it 4 me.

Btw, Beautiful car Nissaner, I Luv black!:burnout:

Link to comment
https://www.sau.com.au/forums/topic/14263-attesa-system/#findComment-291882
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...