Jump to content
SAU Community

Good Body Work/kit Workshop Needed.


Recommended Posts

Hey guys,

Hypothetical case here.... :D

A person backed into my car, but thing is my front bar was already damaged, they don't know that.

Basically I want a list of reputable or good bodywork places that you guys actually trust with your car. I just want to get about 2 - 3 quotes. I don't wanna go with the insurance company's dodgy brothers panel beaters so if you guys could list a couple of places you trust I would greatly appreciate it.

South-East suburbs if possible. :D

What I'm trying to do is scam insurance slightly. :rofl:

I'm going to ask the place to do a quote for me on a aftermarket front bar instead of a stock 2nd handy with the reason being it was impossible to source a 2nd hand of the exact front bar, so the next cheapest kit up is what I want. :D

Anyone here done something similar and how easy do insurance companies go along with that?

Thanks for your help guys!

Link to comment
https://www.sau.com.au/forums/topic/142772-good-body-workkit-workshop-needed/
Share on other sites

Just picked up my 33 from DT panels in Springvale today, man im gonna be hard for ages!!!

Top job, top prices!! When my S14's ready(if ever) ill be taking that to DT also!!

SS8 Gohan also had his 34 painted there.

No problem, 12 Lightwood Drive Springvale, near the station.

He did all the Topstage cars @ MAS, Nismo Racer post up some pics of your beast!!!

No pics yet Dezz, i dun wanna get flamed for having chromies and airbrush(still to come) :P

Mate i swear by Gals Smash Repairs.

Hes in Tullamarine but he did a Smick job of my car and i cant fault dave at all.

Hes a top guy..

9335 2599. Speak to Dave tell him you know Matt with the Skyline..

I also know of a few other here who will agree to his work..

PM me if you have any questions...

Hey guys,

Hypothetical case here.... :)

A person backed into my car, but thing is my front bar was already damaged, they don't know that.

Basically I want a list of reputable or good bodywork places that you guys actually trust with your car. I just want to get about 2 - 3 quotes. I don't wanna go with the insurance company's dodgy brothers panel beaters so if you guys could list a couple of places you trust I would greatly appreciate it.

South-East suburbs if possible. :)

What I'm trying to do is scam insurance slightly. :yes:

I'm going to ask the place to do a quote for me on a aftermarket front bar instead of a stock 2nd handy with the reason being it was impossible to source a 2nd hand of the exact front bar, so the next cheapest kit up is what I want. :P

Anyone here done something similar and how easy do insurance companies go along with that?

Thanks for your help guys!

Police Road Panel Service4 Police Rd Springvale 3171(03) 9558 5110

My son works there. Do yourself a favour. Ask for Harry and say Alan told you to go there

i heard some real bad things about most of the shops near spingvale station.....seems as though all their VACC certs have been taken away.....

i dunno might just all be bs....but id take the effort to ask if they are still certified

"No problem, 12 Lightwood Drive Springvale, near the station.

He did all the Topstage cars @ MAS, Nismo Racer post up some pics of your beast!!!

No pics yet Dezz, i dun wanna get flamed for having chromies and airbrush(still to come)"

Yeah, DT is the place to be, btw which 33 is urs? ABuSD

http://www.childish.fotopic.net/

Edited by Nismo Racer
Mate i swear by Gals Smash Repairs.

Hes in Tullamarine but he did a Smick job of my car and i cant fault dave at all.

Hes a top guy..

9335 2599. Speak to Dave tell him you know Matt with the Skyline..

I also know of a few other here who will agree to his work..

PM me if you have any questions...

i am one of the people that agree with matt

they worked on my car in april and it came back to me looking better than it did when i first brought it

i was very happy with their work.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. Probably, given that there is only access from the bottom end of it, go with a drill bit. Don't start too small. 7 or 8mm is probably the right size. You want something that can make a big enough hole to do some damage, but not so bit that it clashes with the steel or binds up and breaks your wrist. A slow speed is probably a good idea too. Once the rubber is destroyed, you then have to get the crush tube off the stud, which will be the whole heat/oil/cutting exercise all over again, but this time with the need to strictly avoid damaging the stud (any further than the corrosion might already have done.
    • We replaced the connector just because we could and it was still there, once we swapped the injectors around it stopped. The injectors were something I had thoughts of replacing even before I first started the engine and in hindsight I should have 
    • Not too sure just yet, want to have a go at doing what I can myself, but to start with want someone to cast their eye over it tell me what needs doing to get it running and back on the road, so anyone with great overall knowledge would be ideal.
    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
×
×
  • Create New...