Jump to content
SAU Community

Recommended Posts

I am wondering if nismo brought out 555cc injectors in almost a burgundy red colour

from pictures ive googled they look identical to the 740cc

I also thought the part number may be listed on the actual injector instead. the only text i can see is 'made in japan'. Any ideas how i can tell if they are fake?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/142876-red-555cc-nismo-injectors/
Share on other sites

pics?

who did you buy them off?

Do you want to see any particular angles?

I bought them from a registered business in perth. Workshops i have spoken to recommend them as being honest.

He got them from a guy who sells performance parts to a number of workshops in the area.

post-9455-1163244460.jpg

post-9455-1163244491.jpg

Nismo 555cc injectors for r33 are yellow, 740cc are red.

Thats what i thought but he swears black and blue they are 555cc

The only thing im really worried about is that if they are not genuine, they might be a lower quality and fail on me

Did you get them new?

Where they in a box and sealed in a plastic bag?

Do they have any markings or manufacturers details?

Do not put them on until you know what they are for sure...your tuner can do a flow test on them to see what

they are.

Hope I have been of some help.

Cheers :yes:

Did you get them new?

Where they in a box and sealed in a plastic bag?

Do they have any markings or manufacturers details?

Do not put them on until you know what they are for sure...your tuner can do a flow test on them to see what

they are.

Hope I have been of some help.

Cheers :yes:

good advice althou when i bought my nismo 740cc they didnt come sealed in plastics they where just in a nismo box.

You better get them flow tested because you need to know what they are rated or else your going to have a hard time putting in the injector duty cycle value in an aftermarket ecu

This is a comparison between nismo injectors and my injectors. they look quiet different to me. infact ive found some on ebay that look the same selling at about $330 US (set of 4)

http://cgi.ebay.com/ebaymotors/740cc-Deats...7QQcmdZViewItem

post-9455-1163323533.jpg

post-9455-1163323638.jpg

Where did you get the injectors from?

The deatschwerks ones are hiflow injectors. I just installed deatschwerks injectors into my R33. They are stamped with a number on the injector plug which corresponds to the flow report. IF they don't have the number stamped on them, then they are most like not Deatschwerks

you sure there not those venom injectors getting around.

does it say JECS anywhere?

It may be possible that there simpy an older model NISMO injector, I wouldnt get too worried if they dont look exactly like the latest edition. A few people have confirmed them as being 700's so they most likely are.

Edited by James_03
you sure there not those venom injectors getting around.

does it say JECS anywhere?

It may be possible that there simpy an older model NISMO injector, I wouldnt get too worried if they dont look exactly like the latest edition. A few people have confirmed them as being 700's so they most likely are.

yes it does say JECS, does that mean their venom?

there are actually numbers on the top

6E555707

A46-00

Are venom any good? (just out of interest)

yes it does say JECS, does that mean their venom?

there are actually numbers on the top

6E555707

A46-00

Are venom any good? (just out of interest)

Yep they are JECS 550cc I have exactly the same ones that got delivered yesterday :) They are not NISMO but they are good injectors.

What would be an average price for a set of 6? are they as expensive as the nismo ones?

I got them off another forum member still in their plastic for about $100 each. I was happy with that seeing as other ~550cc injectors are around $140+ each.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...