Jump to content
SAU Community

Removing Back Seat In R32 Gtst

lwboosted

By lwboosted,
in General Maintenance

 Share

Recommended Posts

lwboosted Rising Star

lwboosted

Posted
  • Author
Posted

well i just figured it out... lol, all u need is a little persuation from a big flat screwdriver... there are 2 clips on each side on the very bottom. u need to put the screw driver in there and wedge it up. then it popes out.. need to give it a fair bit.. i thought i was going to break it...

then to get the back rest out just undo the 2 bolts holding it down and then lift up...

D_I_F Grand Master

D_I_F

Posted
Posted

NO no no.. no screw drivers needed.. you just need to pull the bottem part up then out.. its just clipped in..

And for the back part.. there are two screws that you have to undo then you push the back part up towards the back windscreen with the bottem of it towards you and it would unhook off..

RB20JT Rising Star

RB20JT

Posted
Posted

mine were very stifff...just make sure u pull the front straight up...doesnt matter if u apply force

because they r designed to be pulled straight up and out. but pull one side out at a time....the clip that is...

cheers boys

RB20JT Rising Star

RB20JT

Posted
Posted

bottom bolts? the seats arent bolted in....you just have to yank the shit out of the seat...and the pin things will come out...provided you pull directly up!!!

How do you get to the bottom bolts guys? ive been trying to get different kinds of tools in there all day and ima snap the bolt off soon
  • 2 years later...
Ultimategtr Proficient

Ultimategtr

Posted
Posted

Yep, i just did mine today. Taking it out was a piece of piss.

Youd be amazed how dirty it is under the seats and under the speaker tray.

I had a day off so cleaned out the boot and wired up the speakers and other loose bits up, so no more rattling from my boot :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...