Jump to content
SAU Community

Recommended Posts

looking for a cheap set of coilovers to suit R33 gtst

I might have some street dampers available soon they are unfortunately not coilovers but provide a very nice ride....let me know if your interested mate

Items:

1995 R33 GTS-T Airbag Assembly and Airbag Control Electronic box.

Extra Info:

Unmarked Condition required.

Square design four spoke Leather Steering wheel design.

As per picture but in better condition...

http://www.skylinesaustralia.com/forums/po...12062009234.jpg

Happy to buy Steering Wheel as well if required

Must have controller.

Contact Details:

PM

Price and price conditions:

Name a price

Location:

South West of Melbourne, Victoria.

Looking for either a single shock or a front pair of Bilstein (Yellow) shocks to suit R33 / R34 can be complete with springs or just the shocks. The shocks must be in excellent condition with no knocks, leaks or damage.

Also looking for a set of R33 lowered performance springs prefer something like Eibach but will consider all available options.

Please PM or sms 0404998591 with details of what you have, location and price. If you are not in Adelaide please let me know a delivered price.

Thanks in advance for replies

Items:

1995 R33 GTS-T bottom cam belt cover and engine fan

Extra Info:

Re placing the water pump as it has a leak, need to replace the above items. I was qouted $195 for a replacement water pump, sounds like the correct figure?

Contact Details:

PM or sms 0419 276 075

Price and price conditions:

Good condition and no cracks in the fan

Location:

Strathalbyn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...