Jump to content
SAU Community

Recommended Posts

Items:

R33 M-Spec Front Bar S1

Extra Info:

White, Half decent paint job, if not still let me know what it looks like

Contact Details:

PM me

Price and price conditions:

Let me know that your after and we can work out a deal

Need an RB20 silvertop ECU asap, no loom, just the box, I won't be checking this thread so could you please call me on <removed> or PM me with price that would be amazing. Also need a nistune for it, I am planning on getting this separately but if you have the lot that would be even better.

Thanks guys :cool:

How much was it to get your system made up? I am tempted to get a stainless catback made up, i got stainless front pipes on now. That sounds mental though I love it.

Edited by Weezy

i paid a bit under 1000 for a split dump highflow cat and custom twin system

should of been closer to $1200 Andrew really looked after me (Heslo can vouch for being well looked after as can Dave even with a few drama's)

steel was Australian stainless not Chinese rubbish

I might have to hit him up for a stainless cat back as I've already got the front pipes. I'll see how I go :rant: Few other important things right now I want to take care of with the car and the exhaust as is, is okay.

I'm thinking going 3.5" catback, whats everyone else think?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...