Jump to content
SAU Community

Recommended Posts

A straight through pipe doesn't really make it that much louder now drone in the cabin (unless the exhaust is prone to do so anyway) just a tad deeper and gruntier sounding.

A well setup exhaust shouldn't drone in the cabin full stop.

A straight through pipe doesn't really make it that much louder now drone in the cabin (unless the exhaust is prone to do so anyway) just a tad deeper and gruntier sounding.

A well setup exhaust shouldn't drone in the cabin full stop.

agreed...my exhuast is pretty much a straight pipe from the cat back and it IS loud...but not drony and more than bearable on idle and low revs.

How about you just do the right thing and buy a new cat...

Think of the environment.

Think of the cancer growing in your lungs from breathing in your un-catalysed exhaust gasses.

Is it worth it all just for gaining a few kW?

those kind of emmissions won't cause lung cancer... not in short-term exposure anyway

lung disease, yes (eg lung fibrosis)

you'd have to be breathing in funes everyday for years to be at risk there

honestly, i did this to my car before i got a high-flow cat and i noticed no increase in exhaust note, and no difference in power at all!

so it begs the question, why bother?

A straight through pipe doesn't really make it that much louder now drone in the cabin (unless the exhaust is prone to do so anyway) just a tad deeper and gruntier sounding.

A well setup exhaust shouldn't drone in the cabin full stop.

mine mustn't be setup too well then. hehe!

Going back to the original question why would you go to all the effort of putting a straight pipe through the cat? its pointless, if a cop pulls you over its usually due to the smell or noise and then they'll send you to the transport department. There are performance gains from a straight through pipe, but its not worth it on your daily driver.

My car has a decent high flow cat but since i installed a power fc and had it tuned it is running quiet rich and i always get pops through my exhaust, sometimes very loud ones. will this destroy my cat pretty quickly?

yeh they might look like a cat but if ya blowing flames out the exhaust they might be a bit suss about that

ive have a stock r32 im running on the track. ive gutted the cat and taken the rear muffler off. will i blow flames?? if so, cool!!!

and will i notice much difference without it? i havent tried it yet, have to wait till next weekend.

i will have a 3'' system on it by feb next year but for now its honkin ok.

Edited by johnGTS-t

there is almost no difference between a 'highflow' cat and a straight through pipe in terms of performance...

I know because the 2 bolts holding my cat to the front pipe came out last week and I was driving around for a few days with no muffling of any kind... the noise was deafening and sounded like crap below 3000rpm... I was even turning the ignition off at light because I was so ashamed...

now its fixed the performance difference is hardly noticable and that is with a cat, resonator and muffler bolted back on... so just get a proper cat and do everyone a favour

kinda sounds like you were going to gut your cat no matter what these guys have said? :S

the gutted cats iv heard sound hollow n a bad sound as if they have big exhuast leaks...

CJ

ps, i must be a lazy cu*t, i sit in maccas drivethrough for 1hr!! (yeh right)

Ive got a black car so it won't look that different. It will fit you just have to cut the cat housing a bit. As for cancer and contributing to the death of the environment.. you guys are funny.

I think it evens out for me acually, i ride to work and catch the train to uni so i only drive my rig on the weekends which is alot better for the environment. The lazy cu*ts who drive everywhere and would rather sit for 1hr in macas drive through than walk into the place and be in and out in 5 mins are the ones you guys should be angry at.

cheers.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...