Jump to content
SAU Community

Aftermarket Plenum To Suit R34

walkoau

By walkoau,
in Engines & Forced Induction

 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
Posted

hi guys

anyone know if there is an aftermaket plenum to suit an r34gtt? im after one with a front facing throttle body.?

why dont the ones for r33 fit r34neo engines? is it only because of the fuel rail? what other mods would need to be done if any?

thanks

Justin

Link to comment
https://www.sau.com.au/forums/topic/144004-aftermarket-plenum-to-suit-r34/
Share on other sites
Abo Bob Grand Master

Abo Bob

Posted
Posted

They don't bolt up to the head. Completely different.

I have heard of an R33 one fitting with some new holes drilled into the head and some on the plenum but haven't seen it.

You could get a custom one for the top half only made up fairly easily.

There has been talk of a couple being available soon but soon just keeps stretching out into infinity.

Adriano Grand Master

Adriano

Posted
Posted
They don't bolt up to the head. Completely different.

I have heard of an R33 one fitting with some new holes drilled into the head and some on the plenum but haven't seen it.

You could get a custom one for the top half only made up fairly easily.

There has been talk of a couple being available soon but soon just keeps stretching out into infinity.

Are you 100% sure, i havnt tried it, but only as i havnt had the parts at the same time, i am pretty sure they are the same bolt pattern, The injectors and fuel fail mounts are different.

infected flow Rising Star

infected flow

Posted
Posted
They don't bolt up to the head. Completely different.

I have heard of an R33 one fitting with some new holes drilled into the head and some on the plenum but haven't seen it.

You could get a custom one for the top half only made up fairly easily.

There has been talk of a couple being available soon but soon just keeps stretching out into infinity.

OK now the greddy r33 plenum does fit the r34.. lets put that to bed now i have one on my car and no problems..

walkoau Mentor

walkoau

Posted
  • Author
Posted

hey guys

1

im not saying anyone is wrong or wright here, (as i have no proof and havent tried this yet) but i find it hard to beleave nissan would change the bolt pattern on r34 to be differrent from r33, so can anyone 100% confirm the pattern is different or is it just what ppl have been told?

2

is the top half of the plenum the same pattern as r33?

3

IF IF IF the patterns are the same, all that would need to be changed are the fuel rail+injectors?

4

Mario, More info please!!!!!!! i know it sounds like a stupid question but are you 100% sure your engine is a Neo? if it is we know a greddy plenum will fit! please give us more info and photos.....i want a greddy plenum soooo bad so i can tidy up my engine bay.

so can anyone give a 100%confirmed answer for the top 2 answers?

thanks

Justin

Forged Experienced

Forged

Posted
Posted (edited)

theres a guy on the forum user name: 600hp who makes custom plenums for R34 GTT. very good quality and price, flow more/better than most jap name brands I was told. just send him a pm. cheers

Edited by Forged
walkoau Mentor

walkoau

Posted
  • Author
Posted (edited)
you could always cough up the money for a RIPS plenum...but the greddy one does fit, you'll have to use the r33 iac and fuel rails iirc.

so the patern is the same and the greddy plenum will fit yaaaaa...

i hate to sound dumb or ignorant,(but i am a simple deisel mechanic) can someone post up a pics of the r33 IAC (idle air control valve) and an r34 one?

what about the traction control throttle body?

i would like to set up a Q45 throttle body is it easy to set up? eg electrical plug, how to set up tps?

thanks

Justin

Edited by walkoau
Forged Experienced

Forged

Posted
Posted
This 600HP plenum; does it retain all the R34 bits like fuel rail and injectors? Got a photo?

i believe itis compatible with the factory fuel system, with larger throttle body too. best to pm the guy.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...