Jump to content
SAU Community

Rb25 Head Removal

aphid

By aphid,
in Engines & Forced Induction

 Share

Recommended Posts

Craved Grand Master

Craved

Posted
Posted
thanks a million mate the pics will really help, clears up soo much :ninja: i shall report back shortly

no worries

have a look around on the web, there are definately engine manuals for the r33 out there

  • 5 years later...
ninety3 Newbie

ninety3

Posted
Posted

Digging up an old thread here but are the 1997 stageas different? looking at that last pic, the radiator water pipe is in the way on my engine. Also, any tips on getting the 3 centre head bolts out, as they seem to be on the verge of stripping. Stupid hex heads...

Slattery Gts-t Contributor

Slattery Gts-t

Posted
Posted

Did you get the M6 bolt out? dont worry about the spring inside the inlet cam gear, just undo the four screws and the plate and spring will come out then you have access to the main nut or bolt that holds the cam gear on

I too felt uneasy about letting that spring go but when you remove it it will all become clear

I nearly stripped a head stud too but if your in doubt get a brand new alen key and cut it down and hit it into the stud gently with a hammer to make sure its in all the way then put your 10mm socket over it with your breaker bar (hope your not using a rattle gun for these studs)

  • 6 years later...
Tabsta1 Newbie

Tabsta1

Posted
Posted

When i done it I took the few pipes that are on top and around the left side off the turbo to give more some room. Then I removed the turbo and made my way to the manifold undone the bolts and it seem to come off easy enough for my self. Now to put  new manifold on and put the new turbo on with customizing my dump pipe and exhaust out let to fit my turbo. Have learnt alot and teached myself a long the way. Have all most gone over everything under my hood and under the car since i got it. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...