Jump to content
SAU Community

Recommended Posts

As topic states.

Engine currently in need of rebuild as #6 cylinder has no comp (56, compared to 147-152 in all others). Have owned the car for 2 years, has done a total of just under 10,000ks while in my ownership. Engine had (standard) rebuild by RACEPACE approx 10k before i purchased car. All recent work done by PROTEK Automotive.

***CAN ORGANISE ENGINE REBUILD FOR OWNER IF REQUIRED***

1992 GTR Skyline

Marone in colour

90,382 kms

Aftermarket 320km Dash

Bilstien Suspension (Quite hard for street driving)

3" kakimoto exhaust

Racepace "racecat"

HKS Adjustable cam gers

Oil Catch can

Apexi RX6 twin high mount turbo kit. Polished compressor covers and cooler pipes. External wastegate and screamer pipe.

Turbo specs (unsure of a/r sizes)- Compressor wheel - inducer 53mm, exducer 78mm. Exhaust wheel - 57mm.

Apexi filters

Custom power steering can (made so turbo's and induction pipes could fit)

Greedy boost and A/F meter gauge

Nismo twin plate clutch

and was told by previous owner that car has strengthened 1st, 2nd and 3rd gearsets.

New battery and front brake (competition) pads.

Interior in excellent condition, has just 1 small burn mark on right side of rear seat. all trim, dash perfect. Paint/rubbers also in very good condition - no rust.

Car ran 12.027 @ 112.33mph with previous set up (car was tuned at 235rwkw). Didn't get a chance to time with current set-up and unsure of power before engine went poop.

***Car currently has Autronic SM4 computer and a set of Volk 19" wheels, which will not be sold with car, unless some kind of agreement can be made. Will sell with Tomei chipped ECU and a set of 17" Volk C-ULTRA's***

If sold without Autronic will include airflow meters blah blah so car can run with standard computer. Also will include standard turbo set up (1 turbo no exhaust wheel).

NOW - $14000 ono

Please PM for enquiries.

Cheers,

Mick

th_GTRfront.jpg th_Passengerbside.jpg th_Engine.jpg th_Volks17.jpg th_GTRside.jpg th_48f2f975.jpg

Also have

Tomei 260' poncams

Sard 700cc injectors

Sard Fuel Rail and Nismo off rail fuel reg

HKS Remote filter and oil cooler

Apexi AVCR

Greedy Black faced gauges - oil pressure/temp and water temp.

Edited by OBES
Link to comment
https://www.sau.com.au/forums/topic/144661-r32-gtr-victoria-14000-ono/
Share on other sites

Are these included with the car?

Tomei 260' poncams

Sard 700cc injectors

Sard Fuel Rail and Nismo off rail fuel reg

HKS Remote filter and oil cooler

Apexi AVCR

Greedy Black faced gauges - oil pressure/temp and water temp.

Why did you go with the Apexi turbo's?

What has been done to the engine internally? (headwork, forgies)

Edited by dontfeelcold

Got a guy coming to look at it Wednesday actually.

Wheels were on car when it was purchased. Previous owner told me he got them from Jap, unsure of original purchase price but i dare say they weren't cheap. If it does sell, i'll let you know and we can see if we can work out a deal.

Cheers,

Mick.

SOLD - pending final payment.

Offers (sensible) invited on

Tomei 260' poncams

Sard 700cc injectors

Sard Fuel Rail and Nismo off rail fuel reg

HKS Remote filter and oil cooler

Apexi AVCR

Greedy Black faced gauges - oil pressure/temp and water temp.

Autronic SM4 computer

set of Volk 19" wheels

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Apologies to all about the delays in getting back to people.

Write off - pm replied

Rowdyr32 - pm replied

123456 - sorry, not interested.

Stretch - send mob again as i lost it and i'll call as soon as i receive it.

Thanks,

Mick.

P.s Parts For Sale

Tomei Poncams 260' - $800

HKS oil cooler and relocator - $450

Sard 700cc inj - $600

Sard rail - $300

Nismo reg - $200

Apexi SAFC - $450

Autronic SM4 - $1500 (inc. crank angle sensor disk, etc)

Greddy Gauges (black) Oil temp, oil pressure and water temp - $100 each

  • 6 months later...
Apologies to all about the delays in getting back to people.

Write off - pm replied

Rowdyr32 - pm replied

123456 - sorry, not interested.

Stretch - send mob again as i lost it and i'll call as soon as i receive it.

Thanks,

Mick.

P.s Parts For Sale

Tomei Poncams 260' - $800

HKS oil cooler and relocator - $450

Sard 700cc inj - $600

Sard rail - $300

Nismo reg - $200

Apexi SAFC - $450

Autronic SM4 - $1500 (inc. crank angle sensor disk, etc)

Greddy Gauges (black) Oil temp, oil pressure and water temp - $100 each

autronic sm4 still avaiable? can i have the details for all the sensors , hardness plus whatever is included? thanks.

PM me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...