Jump to content
SAU Community

Recommended Posts

hey all,

ive had my stereo in now for 2-3months and got a small thing thats annoying...when i crank it up with heavy bass, my rear view mirror vibrates so much is it basically tips the mirror sideways , is there any way i can stop it coz i can see squat behind me.

Link to comment
https://www.sau.com.au/forums/topic/144931-vibrating-mirrors/
Share on other sites

My old calais did the same thing, but the side mirrors were fine - they didn't vibrate. So keep an eye out of those instead!

If your centre mirror tips, maybe you can pull it apart, and put something sticky in the ball joint so it is a bit stiffer - it will still shake, but wont tip sideways!

My old calais did the same thing, but the side mirrors were fine - they didn't vibrate. So keep an eye out of those instead!

If your centre mirror tips, maybe you can pull it apart, and put something sticky in the ball joint so it is a bit stiffer - it will still shake, but wont tip sideways!

yeah same issue mate, my side mirrors dont vibrate, i should look at something to stop the mirror tipping, i thought glue it straight, but that may cause more problems hehe

eh? what's that ..... ? (says the deaf man :ninja: )

hehehe *uses sign language*

Turn the music down.

The guys 200 metres down the road don't want to be able to sing your song.

If your stereo is that loud, it is also illegal!

When I turn mine up for shits and giggles (Very occasional) it only vibrates the inside mirror, it doesn't twist it around, and I know how solid my bass is, if you're twisting the mirror, turn it down!

Basically, it's not the car shaking thats doing it, it's the air movement. I can feel my sub moving all of the air in my car when it's up loud. But hey, my stereo is for me, not the guy driving infront/behind. SO TURN IT DOWN. I don't want to hear your music!

ok i had this same problem to in my 32, take the mirrors, i think 3 bolts, after there off look underneith your mirror and u should see a small cover, take it off with a flat screw driver.

once its off u will see a couple of screws tighten up as much as u can, as mine were loose as a whore.

ok i had this same problem to in my 32, take the mirrors, i think 3 bolts, after there off look underneith your mirror and u should see a small cover, take it off with a flat screw driver.

once its off u will see a couple of screws tighten up as much as u can, as mine were loose as a whore.

thanks mate, i might have to take off the mirror and hopefully tighten it up as much as i can and stop my mirror moving

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...