Jump to content
SAU Community

Recommended Posts

hey all,

ive had my stereo in now for 2-3months and got a small thing thats annoying...when i crank it up with heavy bass, my rear view mirror vibrates so much is it basically tips the mirror sideways , is there any way i can stop it coz i can see squat behind me.

Link to comment
https://www.sau.com.au/forums/topic/144931-vibrating-mirrors/
Share on other sites

My old calais did the same thing, but the side mirrors were fine - they didn't vibrate. So keep an eye out of those instead!

If your centre mirror tips, maybe you can pull it apart, and put something sticky in the ball joint so it is a bit stiffer - it will still shake, but wont tip sideways!

My old calais did the same thing, but the side mirrors were fine - they didn't vibrate. So keep an eye out of those instead!

If your centre mirror tips, maybe you can pull it apart, and put something sticky in the ball joint so it is a bit stiffer - it will still shake, but wont tip sideways!

yeah same issue mate, my side mirrors dont vibrate, i should look at something to stop the mirror tipping, i thought glue it straight, but that may cause more problems hehe

eh? what's that ..... ? (says the deaf man :ninja: )

hehehe *uses sign language*

Turn the music down.

The guys 200 metres down the road don't want to be able to sing your song.

If your stereo is that loud, it is also illegal!

When I turn mine up for shits and giggles (Very occasional) it only vibrates the inside mirror, it doesn't twist it around, and I know how solid my bass is, if you're twisting the mirror, turn it down!

Basically, it's not the car shaking thats doing it, it's the air movement. I can feel my sub moving all of the air in my car when it's up loud. But hey, my stereo is for me, not the guy driving infront/behind. SO TURN IT DOWN. I don't want to hear your music!

ok i had this same problem to in my 32, take the mirrors, i think 3 bolts, after there off look underneith your mirror and u should see a small cover, take it off with a flat screw driver.

once its off u will see a couple of screws tighten up as much as u can, as mine were loose as a whore.

ok i had this same problem to in my 32, take the mirrors, i think 3 bolts, after there off look underneith your mirror and u should see a small cover, take it off with a flat screw driver.

once its off u will see a couple of screws tighten up as much as u can, as mine were loose as a whore.

thanks mate, i might have to take off the mirror and hopefully tighten it up as much as i can and stop my mirror moving

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...