Jump to content
SAU Community

Recommended Posts

Here is the short story:

* R33 Skyline

* Had a pod filter

* Defected :P

* EPA emissions test -> passed

* Back to EPA for exhaust retest and he checked I had the stock box back in

* EPA threatened me with a $5k fine & court apperance if I get caught again

So now what do I do??

The stock box makes the car feel a little sluggish :P

Link to comment
https://www.sau.com.au/forums/topic/14516-dilema-cold-air-stock-box-defect-epa/
Share on other sites

Guest RedLineGTR

have you changed the stock box filter, to like i better flowing one, like k&N which are common, most jap companys make panel filters as well as pods if you were after something more big brand. You could also ask the epa about getting a CAI box made up for your pod, most people are getting away with pods like that.

What about Qld does anyone know?

I have been told that they are illegal and I've also been told that they are legal, then again I've been told by my local inspection centre that they have never heard of a Pod filter.

I don't think they now what they are talking about half the time, it all depends on who you get and what they now or what they think they know

Why dont you keep the stock box in there, replace the filter with a k&n. secure the front air intake to it if you dont have one and then direct a similar cold air feed to the other side of the lid that runs to the front of the car. that should improve the throttle response a little bit and the car shouldn't feel all that sluggish with the extra colder air.

lata

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

Secoh, its the same as 33 / 34 too in that case - the filter number is actually A360 and they are as common as muck! VN>VR commo is same too I believe, they are readily available throughout Victoria and I assume Oz too. Pulsar N14 / N15 and Pintara TRX are also the same...the list goes on...Nissan even sell them brand new!

Dremen, did you find out why the pod filter was illegal? Was it due to emissions or noise pollution or something else?

Either way, the solution is simple. Get a cold air box from somewhere like UAS or Hills Motorsports (Hills do a much better one than UAS, but costs about double) and put the pod inside that.

The reason why I ask if your defect notice was due to emissions or noise is because a pod in a box still makes a lot of noise so it still might be illegal for noise reasons.

Oh, for anyone that finds the flat filter to flow better than their pod, it was because your pod was sucking in a lot of hot air from your engine bay. I had the same problem, but I got a UAS box and it fixed the power right up again.

Guest gtst88
Originally posted by nismoR34

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

can you confirm this nismoR34 ?

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc

thanks buddy !

Cheers !

Guest RedLineGTR

tell this to cops and they will go..pppffff yah right and slap you for a fine for being a smart arse. The best thing to do is get it on paper of vicroads with a act number or something that they could check. Then you can tell them what ya think. Lolz :D

Originally posted by gtst88

can you confirm this nismoR34 ?  

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc  

thanks buddy !

Cheers !

I havent spoken to the EPA directly but a couple of the Melbourne guys have and say that 1 intake mod is allowed...*goes and looks for thread* here's one: laws on mods in vic?

Or just call the EPA to get it from the horses mouth!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...