Jump to content
SAU Community

Recommended Posts

Here is the short story:

* R33 Skyline

* Had a pod filter

* Defected :P

* EPA emissions test -> passed

* Back to EPA for exhaust retest and he checked I had the stock box back in

* EPA threatened me with a $5k fine & court apperance if I get caught again

So now what do I do??

The stock box makes the car feel a little sluggish :P

Link to comment
https://www.sau.com.au/forums/topic/14516-dilema-cold-air-stock-box-defect-epa/
Share on other sites

Guest RedLineGTR

have you changed the stock box filter, to like i better flowing one, like k&N which are common, most jap companys make panel filters as well as pods if you were after something more big brand. You could also ask the epa about getting a CAI box made up for your pod, most people are getting away with pods like that.

What about Qld does anyone know?

I have been told that they are illegal and I've also been told that they are legal, then again I've been told by my local inspection centre that they have never heard of a Pod filter.

I don't think they now what they are talking about half the time, it all depends on who you get and what they now or what they think they know

Why dont you keep the stock box in there, replace the filter with a k&n. secure the front air intake to it if you dont have one and then direct a similar cold air feed to the other side of the lid that runs to the front of the car. that should improve the throttle response a little bit and the car shouldn't feel all that sluggish with the extra colder air.

lata

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

Secoh, its the same as 33 / 34 too in that case - the filter number is actually A360 and they are as common as muck! VN>VR commo is same too I believe, they are readily available throughout Victoria and I assume Oz too. Pulsar N14 / N15 and Pintara TRX are also the same...the list goes on...Nissan even sell them brand new!

Dremen, did you find out why the pod filter was illegal? Was it due to emissions or noise pollution or something else?

Either way, the solution is simple. Get a cold air box from somewhere like UAS or Hills Motorsports (Hills do a much better one than UAS, but costs about double) and put the pod inside that.

The reason why I ask if your defect notice was due to emissions or noise is because a pod in a box still makes a lot of noise so it still might be illegal for noise reasons.

Oh, for anyone that finds the flat filter to flow better than their pod, it was because your pod was sucking in a lot of hot air from your engine bay. I had the same problem, but I got a UAS box and it fixed the power right up again.

Guest gtst88
Originally posted by nismoR34

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

can you confirm this nismoR34 ?

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc

thanks buddy !

Cheers !

Guest RedLineGTR

tell this to cops and they will go..pppffff yah right and slap you for a fine for being a smart arse. The best thing to do is get it on paper of vicroads with a act number or something that they could check. Then you can tell them what ya think. Lolz :D

Originally posted by gtst88

can you confirm this nismoR34 ?  

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc  

thanks buddy !

Cheers !

I havent spoken to the EPA directly but a couple of the Melbourne guys have and say that 1 intake mod is allowed...*goes and looks for thread* here's one: laws on mods in vic?

Or just call the EPA to get it from the horses mouth!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just a standard sanding block size. With the rock chipa they are quite small. I sanded them as you could feel the edges. 
    • Say you've just laid all your filler and your about to start sanding, how large is the sanding block your using?  Like a high fill primer? Technically possible but would be a nightmare. Just guessing from the photo, but they look small enough that you might get away with using a 1k spot putty. Normally you'd use something like this on pinholes but with the type of project you're working on I'd give it a go. 
    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
×
×
  • Create New...