Jump to content
SAU Community

Recommended Posts

Here is the short story:

* R33 Skyline

* Had a pod filter

* Defected :P

* EPA emissions test -> passed

* Back to EPA for exhaust retest and he checked I had the stock box back in

* EPA threatened me with a $5k fine & court apperance if I get caught again

So now what do I do??

The stock box makes the car feel a little sluggish :P

Link to comment
https://www.sau.com.au/forums/topic/14516-dilema-cold-air-stock-box-defect-epa/
Share on other sites

Guest RedLineGTR

have you changed the stock box filter, to like i better flowing one, like k&N which are common, most jap companys make panel filters as well as pods if you were after something more big brand. You could also ask the epa about getting a CAI box made up for your pod, most people are getting away with pods like that.

What about Qld does anyone know?

I have been told that they are illegal and I've also been told that they are legal, then again I've been told by my local inspection centre that they have never heard of a Pod filter.

I don't think they now what they are talking about half the time, it all depends on who you get and what they now or what they think they know

Why dont you keep the stock box in there, replace the filter with a k&n. secure the front air intake to it if you dont have one and then direct a similar cold air feed to the other side of the lid that runs to the front of the car. that should improve the throttle response a little bit and the car shouldn't feel all that sluggish with the extra colder air.

lata

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

Secoh, its the same as 33 / 34 too in that case - the filter number is actually A360 and they are as common as muck! VN>VR commo is same too I believe, they are readily available throughout Victoria and I assume Oz too. Pulsar N14 / N15 and Pintara TRX are also the same...the list goes on...Nissan even sell them brand new!

Dremen, did you find out why the pod filter was illegal? Was it due to emissions or noise pollution or something else?

Either way, the solution is simple. Get a cold air box from somewhere like UAS or Hills Motorsports (Hills do a much better one than UAS, but costs about double) and put the pod inside that.

The reason why I ask if your defect notice was due to emissions or noise is because a pod in a box still makes a lot of noise so it still might be illegal for noise reasons.

Oh, for anyone that finds the flat filter to flow better than their pod, it was because your pod was sucking in a lot of hot air from your engine bay. I had the same problem, but I got a UAS box and it fixed the power right up again.

Guest gtst88
Originally posted by nismoR34

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

can you confirm this nismoR34 ?

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc

thanks buddy !

Cheers !

Guest RedLineGTR

tell this to cops and they will go..pppffff yah right and slap you for a fine for being a smart arse. The best thing to do is get it on paper of vicroads with a act number or something that they could check. Then you can tell them what ya think. Lolz :D

Originally posted by gtst88

can you confirm this nismoR34 ?  

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc  

thanks buddy !

Cheers !

I havent spoken to the EPA directly but a couple of the Melbourne guys have and say that 1 intake mod is allowed...*goes and looks for thread* here's one: laws on mods in vic?

Or just call the EPA to get it from the horses mouth!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...