Jump to content
SAU Community

Recommended Posts

PwrFC VS Microtech?

any experiences or opinions, plz post input

which is better , which runs better, is more cost effective versus adding more mods etc.

and for a Daily driver.. wouldnt it be better to actually keep the afm? for fuel consumption reasons, in different temperatures?.

Link to comment
https://www.sau.com.au/forums/topic/145451-pwrfc-or-microtech/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Not really the results im lookin for..

I know there is LOADS of info on the PFC on these boards.. Not so much about the Microtech on a skyline though..

what i really want is a comparison. I mean.. the PFC was originally designed with Skylines in mind.. wasnt it?.. could be wrong there.. but also the microtech has good self learning features so ive been told,

so i need a comparison, cause im tryin to work out which route im going..

i mean i can get the PFC, get it tuned at pits or somethin, prob cost me 1600 total.

Or i can get the Micro, from Microtech to suit my rb25det, then fully tuned buy my tuners. for 2k flat.

just wondering.. is it better to spend the extra 400$. and i mean, wat if the PFC is better for the skyline..

so can anyone Compare the 2? and point out your reasons for the results.

Depends whether you want air flow readings or Air pressure, they both have their adv and dis but in reality it is what your tuner would prefer.

The microtech being Manifold Air Pressure sensor (MAP) is hesistant around zero pressure, this is a hard area to tune compared to a Manifold Air Flow (MAF) which can determine quite easy if it is flowing or not.

Depends whether you want air flow readings or Air pressure, they both have their adv and dis but in reality it is what your tuner would prefer.

The microtech being Manifold Air Pressure sensor (MAP) is hesistant around zero pressure, this is a hard area to tune compared to a Manifold Air Flow (MAF) which can determine quite easy if it is flowing or not.

Good point,

Yea tuner good with em, Might go with the FC, but hmmm, hard decision. will have to find a tuner for the FC . its a daily driver, not a race car.

Thanks for your comments guys! :D

Edited by silverbulletR33

I'm using a microtech LT-8. Crappy fuel economy, crappy cold start. Not such a fantastic ECU for a daily driver. Power FC is prolly the way to go as in my opinion microtech is more of a racing ecu. So yea, PFC is probably the go for you, except i have a thing against AFM's (don't know why, i just do).

www.nengun.com

www.ebay.com

Still plenty around, just have a look.

nengun doesn't have any in stock.. ebay ? you actually looked for an rb25 one? ZERO. The only ones that are around, are the ones that haven't updated their stock levels properly. When you ask 'no sorry, don't have that model anymore, have the others'

"plenty around" my ass...

had a microtech on my s1 33 gtst actually was the first in adelaide to have their 'plug n play' setup. in short it was very poor as a daily driver, mostly cause it did not have enough adjustment for cold start idle up etc. but as alredy stated, fine for a race/weekend only car. oh yeah and definately agree that your tuner is EVERYTHING when dealing in aftermarket ecu. my choice PFC :)

I have tuned quite a few of both, and unless it has 1000hp and the afm is casing a restriction, the pfc has many more features than the microtec, and will return better fuel economy/cold start/drivability with far less tuning. Most dyno shops can tune a pfc, and many have datalogit, if they cant, i wouldnt let them tune my car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...